Hi Johan,

Johan Hovold 於 2018/1/30 上午 11:57 寫道:

On Mon, Jan 22, 2018 at 03:58:45PM +0800, Ji-Ze Hong (Peter Hong) wrote:

quoted

The F81232 can do remote wakeup via RX/RI pin with pulse.
This patch will use device_set_wakeup_enable to enable this
feature.

This is a policy decision that should be made by user space by setting
the power/wakeup attribute, and not something that something that
drivers should enable directly themselves.

Perhaps you really wanted to use device_set_wakeup_capable()? But then
you also need to honour the current setting in suspend() as well.

How have you tested this feature?

Our USB-To-Serial support RI/ RX remote wakeup by Modem, Fax or
other peripherals and we had tested it by following procedure with
device_set_wakeup_enable() enabled:
     1. Using pm-suspend to S3
     2. Trigger a pulse to RI/RX to wake up system.

In our test, we can do remote wakeup only with
device_set_wakeup_enable() enabled.

Should we add device_set_wakeup_capable() & device_set_wakeup_enable()
like following link??
https://elixir.free-electrons.com/linux/latest/source/drivers/media/rc/mceusb.c#L1476

Thanks