[PATCH v20 06/11] selftests: tracing: Add a basic testcase for wprobe

From
Masami Hiramatsu (Google) <mhiramat@kernel.org>
Date
2026-11-16 05:27:08
Also in
linux-doc, linux-perf-users, lkml
Reply to
Masami Hiramatsu (Google), 2026-11-16
From: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Add 'add_remove_wprobe.tc' testcase for testing wprobe event that
tests adding and removing operations of the wprobe event.

Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
---
Changes in v20:
 - Verify $addr and $value fetchargs in trace output.
 - Add test checks for access modes (r@, rw@), length specifiers,
   symbol offset, and spec-based event removal ('!w:...' and '-:...').
Changes in v17:
 - Catch failures when enabling wprobe and call exit_unresolved
   in case hardware watchpoints are exhausted.
Changes in v9:
 - Fix command check logic to prevent early exit under 'set -e'
   (errexit) when grep or test fails.
 - Simplify enable/disable status checks by removing cat pipes.
Changes in v8:
 - Fixed silently test failure path.
---
 tools/testing/selftests/ftrace/config              |    1 
 .../ftrace/test.d/dynevent/add_remove_wprobe.tc    |   81 ++++++++++++++++++++
 2 files changed, 82 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/dynevent/add_remove_wprobe.tc
diff --git a/tools/testing/selftests/ftrace/config b/tools/testing/selftests/ftrace/config
index 29f05f7c6e2c..c2caea1ba1f5 100644
--- a/tools/testing/selftests/ftrace/config
+++ b/tools/testing/selftests/ftrace/config
@@ -33,3 +33,4 @@ CONFIG_SYNTH_EVENTS=y
 CONFIG_TRACER_SNAPSHOT=y
 CONFIG_UPROBES=y
 CONFIG_UPROBE_EVENTS=y
+CONFIG_WPROBE_EVENTS=y
diff --git a/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_wprobe.tc b/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_wprobe.tc
new file mode 100644
index 000000000000..40c69c3f2ba5
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_wprobe.tc
@@ -0,0 +1,81 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: Generic dynamic event - add/remove wprobe events
+# requires: dynamic_events "w[:[<group>/][<event>]] [r|w|rw]@<addr>[:<len>]":README
+
+echo 0 > events/enable
+echo > dynamic_events
+
+# Use jiffies as a variable that is frequently written to.
+TARGET=jiffies
+
+echo "w:my_wprobe w@$TARGET addr=\$addr val=\$value" >> dynamic_events
+
+if ! grep -q my_wprobe dynamic_events; then
+    echo "Failed to create wprobe event"
+    exit_fail
+fi
+
+if [ ! -d events/wprobes/my_wprobe ]; then
+    echo "Failed to create wprobe event directory"
+    exit_fail
+fi
+
+if ! echo 1 > events/wprobes/my_wprobe/enable; then
+    echo "Failed to enable wprobe (hardware watchpoints may be exhausted)"
+    exit_unresolved
+fi
+
+# Check if the event is enabled
+if ! grep -q 1 events/wprobes/my_wprobe/enable; then
+    echo "Failed to enable wprobe event"
+    exit_fail
+fi
+
+# Let some time pass to trigger the breakpoint
+sleep 1
+
+# Check if we got any trace output with fetchargs
+if ! grep -q "my_wprobe:.*addr=.*val=" trace; then
+    echo "wprobe event was not triggered or missing fetchargs"
+    exit_fail
+fi
+
+echo 0 > events/wprobes/my_wprobe/enable
+
+# Check if the event is disabled
+if ! grep -q 0 events/wprobes/my_wprobe/enable; then
+    echo "Failed to disable wprobe event"
+    exit_fail
+fi
+
+echo "-:my_wprobe" >> dynamic_events
+
+if grep -q my_wprobe dynamic_events; then
+    echo "Failed to remove wprobe event"
+    exit_fail
+fi
+
+if [ -d events/wprobes/my_wprobe ]; then
+    echo "Failed to remove wprobe event directory"
+    exit_fail
+fi
+
+# Test access modes, lengths, symbol offset, and spec-based removal
+echo "w:my_wprobe1 r@$TARGET:1" >> dynamic_events
+echo "w:my_wprobe2 rw@$TARGET+4:4 val=+0(\$addr)" >> dynamic_events
+echo "!w:wprobes/my_wprobe1 r@$TARGET:1" >> dynamic_events
+if grep -q my_wprobe1 dynamic_events; then
+    echo "Failed to remove my_wprobe1 with '!' syntax"
+    exit_fail
+fi
+
+echo "-:wprobes/my_wprobe2 rw@$TARGET+4:4 val=+0(\$addr)" >> dynamic_events
+if grep -q my_wprobe2 dynamic_events; then
+    echo "Failed to remove my_wprobe2 with full spec"
+    exit_fail
+fi
+
+clear_trace
+
+exit 0
Thread (17 messages) 17 messages, 2 authors, last reply 18h ago
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help