From: Wei Li <redacted>
The "X" value of the enable file and the "*" marker of the reactors file
are undocumented. Document both in the monitors section.
Signed-off-by: Wei Li <redacted>
---
Documentation/trace/rv/runtime-verification.rst | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/trace/rv/runtime-verification.rst b/Documentation/trace/rv/runtime-verification.rst
index c700dde9259c..0d9edb687836 100644
--- a/Documentation/trace/rv/runtime-verification.rst
+++ b/Documentation/trace/rv/runtime-verification.rst
@@ -210,12 +210,16 @@ For example::
- Writing "0" disables the *MONITOR*
- Writing "1" enables the *MONITOR*
-- Reading return the current status of the *MONITOR*
+- Reading returns "0" if the *MONITOR* is disabled, and "1" if it is
+ enabled. For a container, "X" is returned when only some of its
+ nested monitors are enabled.
**monitors/MONITOR/reactors**
- List available reactors, with the select reaction for the given *MONITOR*
inside "[]". The default one is the nop (no operation) reactor.
+- A "*" after the selected reactor of a container indicates that some
+ nested monitors use a different reactor.
- Writing the name of a reactor enables it to the given MONITOR.
For example::
--
2.55.0