@@ -1281,6 +1281,106 @@ const struct attribute_group *spi_hid_groups[] = {
 };
 EXPORT_SYMBOL_GPL(spi_hid_groups);
 
+/*
+ * At the end of probe we initialize the device:
+ *   0) assert reset, bias the interrupt line
+ *   1) sleep minimal reset delay
+ *   2) power up the device
+ *   3) deassert reset (high)
+ * After this we expect an IRQ with a reset response.
+ */
+static int spi_hid_dev_init(struct spi_hid *shid)
+{
+	struct spi_device *spi = shid->spi;
+	struct device *dev = &spi->dev;
+	int error;
+
+	shid->ops->assert_reset(shid->ops);
+
+	shid->ops->sleep_minimal_reset_delay(shid->ops);
+
+	error = shid->ops->power_up(shid->ops);
+	if (error) {
+		dev_err(dev, "%s: could not power up\n", __func__);
+		shid->regulator_error_count++;
+		shid->regulator_last_error = error;
+		return error;
+	}
+
+	shid->ops->deassert_reset(shid->ops);
+
+	enable_irq(spi->irq);
+
+	return 0;
+}
+
+static void spi_hid_panel_follower_work(struct work_struct *work)
+{
+	struct spi_hid *shid = container_of(work, struct spi_hid,
+					    panel_follower_work);
+	int error;
+
+	if (!shid->desc.hid_version)
+		error = spi_hid_dev_init(shid);
+	else
+		error = spi_hid_resume(shid);
+	if (error)
+		dev_warn(&shid->spi->dev, "Power on failed: %d\n", error);
+	else
+		WRITE_ONCE(shid->panel_follower_work_finished, true);
+}
+
+static int spi_hid_panel_follower_resume(struct drm_panel_follower *follower)
+{
+	struct spi_hid *shid = container_of(follower, struct spi_hid, panel_follower);
+
+	/*
+	 * Powering on a touchscreen can be a slow process. Queue the work to
+	 * the system workqueue so we don't block the panel's power up.
+	 */
+	WRITE_ONCE(shid->panel_follower_work_finished, false);
+	schedule_work(&shid->panel_follower_work);
+
+	return 0;
+}
+
+static int spi_hid_panel_follower_suspend(struct drm_panel_follower *follower)
+{
+	struct spi_hid *shid = container_of(follower, struct spi_hid, panel_follower);
+
+	cancel_work_sync(&shid->panel_follower_work);
+
+	if (!READ_ONCE(shid->panel_follower_work_finished))
+		return 0;
+
+	return spi_hid_suspend(shid);
+}
+
+static const struct drm_panel_follower_funcs
+				spi_hid_panel_follower_prepare_funcs = {
+	.panel_prepared = spi_hid_panel_follower_resume,
+	.panel_unpreparing = spi_hid_panel_follower_suspend,
+};
+
+static int spi_hid_register_panel_follower(struct spi_hid *shid)
+{
+	struct device *dev = &shid->spi->dev;
+
+	shid->panel_follower.funcs = &spi_hid_panel_follower_prepare_funcs;
+
+	/*
+	 * If we're not in control of our own power up/power down then we can't
+	 * do the logic to manage wakeups. Give a warning if a user thought
+	 * that was possible then force the capability off.
+	 */
+	if (device_can_wakeup(dev)) {
+		dev_warn(dev, "Can't wakeup if following panel\n");
+		device_set_wakeup_capable(dev, false);
+	}
+
+	return drm_panel_add_follower(dev, &shid->panel_follower);
+}
+
 int spi_hid_core_probe(struct spi_device *spi, struct spihid_ops *ops,
 		       struct spi_hid_conf *conf)
 {

@@ -1300,6 +1400,7 @@ int spi_hid_core_probe(struct spi_device *spi, struct spihid_ops *ops,
 	shid->ops = ops;
 	shid->conf = conf;
 	set_bit(SPI_HID_RESET_PENDING, &shid->flags);
+	shid->is_panel_follower = drm_is_panel_follower(&spi->dev);
 
 	spi_set_drvdata(spi, shid);
 

@@ -1313,6 +1414,7 @@ int spi_hid_core_probe(struct spi_device *spi, struct spihid_ops *ops,
 	init_completion(&shid->output_done);
 
 	INIT_WORK(&shid->reset_work, spi_hid_reset_work);
+	INIT_WORK(&shid->panel_follower_work, spi_hid_panel_follower_work);
 
 	/*
 	 * We need to allocate the buffer without knowing the maximum

@@ -1323,20 +1425,6 @@ int spi_hid_core_probe(struct spi_device *spi, struct spihid_ops *ops,
 	if (error)
 		return error;
 
-	/*
-	 * At the end of probe we initialize the device:
-	 *   0) assert reset, bias the interrupt line
-	 *   1) sleep minimal reset delay
-	 *   2) request IRQ
-	 *   3) power up the device
-	 *   4) deassert reset (high)
-	 * After this we expect an IRQ with a reset response.
-	 */
-
-	shid->ops->assert_reset(shid->ops);
-
-	shid->ops->sleep_minimal_reset_delay(shid->ops);
-
 	error = devm_request_threaded_irq(dev, spi->irq, NULL, spi_hid_dev_irq,
 					  IRQF_ONESHOT | IRQF_NO_AUTOEN, dev_name(&spi->dev), shid);
 	if (error) {

@@ -1351,22 +1439,28 @@ int spi_hid_core_probe(struct spi_device *spi, struct spihid_ops *ops,
 		}
 	}
 
-	error = shid->ops->power_up(shid->ops);
-	if (error) {
-		dev_err(dev, "%s: could not power up\n", __func__);
-		if (device_may_wakeup(dev))
-			dev_pm_clear_wake_irq(dev);
-		return error;
+	if (shid->is_panel_follower) {
+		error = spi_hid_register_panel_follower(shid);
+		if (error) {
+			dev_err_probe(dev, error,
+				      "Failed to register panel follower");
+			goto err_wake_irq;
+		}
+	} else {
+		error = spi_hid_dev_init(shid);
+		if (error)
+			goto err_wake_irq;
 	}
 
-	shid->ops->deassert_reset(shid->ops);
-
-	enable_irq(spi->irq);
-
 	dev_dbg(dev, "%s: d3 -> %s\n", __func__,
 		spi_hid_power_mode_string(shid->power_state));
 
 	return 0;
+
+err_wake_irq:
+	if (device_may_wakeup(dev))
+		dev_pm_clear_wake_irq(dev);
+	return error;
 }
 EXPORT_SYMBOL_GPL(spi_hid_core_probe);
 

@@ -1376,15 +1470,21 @@ void spi_hid_core_remove(struct spi_device *spi)
 	struct device *dev = &spi->dev;
 	int error;
 
-	disable_irq(spi->irq);
+	if (shid->is_panel_follower)
+		drm_panel_remove_follower(&shid->panel_follower);
+	else
+		disable_irq(spi->irq);
+
 	cancel_work_sync(&shid->reset_work);
 
 	spi_hid_stop_hid(shid);
 
-	shid->ops->assert_reset(shid->ops);
-	error = shid->ops->power_down(shid->ops);
-	if (error)
-		dev_err(dev, "failed to disable regulator\n");
+	if (shid->power_state != HIDSPI_OFF) {
+		shid->ops->assert_reset(shid->ops);
+		error = shid->ops->power_down(shid->ops);
+		if (error)
+			dev_err(dev, "failed to disable regulator\n");
+	}
 
 	if (device_may_wakeup(dev))
 		dev_pm_clear_wake_irq(dev);

@@ -1395,6 +1495,9 @@ static int spi_hid_core_pm_suspend(struct device *dev)
 {
 	struct spi_hid *shid = dev_get_drvdata(dev);
 
+	if (shid->is_panel_follower)
+		return 0;
+
 	return spi_hid_suspend(shid);
 }
 

@@ -1402,6 +1505,9 @@ static int spi_hid_core_pm_resume(struct device *dev)
 {
 	struct spi_hid *shid = dev_get_drvdata(dev);
 
+	if (shid->is_panel_follower)
+		return 0;
+
 	return spi_hid_resume(shid);
 }
 

@@ -10,6 +10,8 @@
 #include <linux/hid-over-spi.h>
 #include <linux/spi/spi.h>
 
+#include <drm/drm_panel.h>
+
 /* Protocol message size constants */
 #define SPI_HID_READ_APPROVAL_LEN		5
 #define SPI_HID_OUTPUT_HEADER_LEN		8

@@ -56,6 +58,10 @@ struct spi_hid {
 	struct spi_hid_input_buf *input;	/* Input buffer. */
 	struct spi_hid_input_buf *response;	/* Response buffer. */
 
+	struct drm_panel_follower panel_follower;
+	bool	is_panel_follower;
+	bool	panel_follower_work_finished;
+
 	u16 response_length;
 	u16 bufsize;
 

@@ -66,6 +72,7 @@ struct spi_hid {
 	unsigned long flags;	/* device flags. */
 
 	struct work_struct reset_work;
+	struct work_struct panel_follower_work;
 
 	/* Control lock to ensure complete output transaction. */
 	struct mutex output_lock;