The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 7e7b0eb90c80..c4058ee36fec 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi

@@ -309,7 +309,7 @@ temperature-sensor@4c {
 
 				interrupt-parent = <&gpio>;
 				interrupts = <TEGRA194_MAIN_GPIO(H, 2)
-					      IRQ_TYPE_LEVEL_LOW>;
+					      IRQ_TYPE_EDGE_FALLING>;
 				vcc-supply = <&vdd_1v8ls>;
 
 				#thermal-sensor-cells = <1>;

-- 
2.32.0