[PATCH v3 1/2] dt-bindings: Add documentation for GV11B GPU
From: Thierry Reding <hidden>
Date: 2020-07-17 08:36:24
Also in:
linux-arm-kernel, linux-devicetree
Subsystem:
drm drivers, drm drivers and misc gpu patches, open firmware and flattened device tree bindings, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Thierry Reding <redacted> The GV11B's device tree bindings are the same as for GP10B, though the GPU is not completely compatible, so all that is needed is a different compatible string. Signed-off-by: Thierry Reding <redacted> --- Changes in v3: - document the "fuse" clock which needs to be enabled during the GPU initialization .../devicetree/bindings/gpu/nvidia,gk20a.txt | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+)
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
index f32bbba4d3bc..662a3c8a7d29 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt@@ -6,6 +6,7 @@ Required properties: - nvidia,gk20a - nvidia,gm20b - nvidia,gp10b + - nvidia,gv11b - reg: Physical base address and length of the controller's registers. Must contain two entries: - first entry for bar0
@@ -25,6 +26,9 @@ Required properties: If the compatible string is "nvidia,gm20b", then the following clock is also required: - ref +If the compatible string is "nvidia,gv11b", then the following clock is also +required: + - fuse - resets: Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names: Must include the following entries:
@@ -88,3 +92,24 @@ Example for GP10B: power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>; iommus = <&smmu TEGRA186_SID_GPU>; }; + +Example for GV11B: + + gpu@17000000 { + compatible = "nvidia,gv11b"; + reg = <0x17000000 0x10000000>, + <0x18000000 0x10000000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "stall", "nonstall"; + clocks = <&bpmp TEGRA194_CLK_GPCCLK>, + <&bpmp TEGRA194_CLK_GPU_PWR>, + <&bpmp TEGRA194_CLK_FUSE>; + clock-names = "gpu", "pwr", "fuse"; + resets = <&bpmp TEGRA194_RESET_GPU>; + reset-names = "gpu"; + dma-coherent; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>; + iommus = <&smmu TEGRA194_SID_GPU>; + };
--
2.27.0