Hi Alan,

On Mon, Feb 12, 2018 at 4:15 PM, Alan Stern [off-list ref] wrote:

On Sun, 11 Feb 2018, Martin Blumenstingl wrote:

quoted

The USB HCD core driver parses the device-tree node for "phys" and
"usb-phys" properties. It also manages the power state of these PHYs
automatically.
However, drivers may opt-out of this behavior by setting "phy" or
"usb_phy" in struct usb_hcd to a non-null value. An example where this
is required is the "Qualcomm USB2 controller", implemented by the
chipidea driver. The hardware requires that the PHY is only powered on
after the "reset completed" event from the controller is received.

A follow-up patch will allow the USB HCD core driver to manage more than
one PHY. Add a new "bool skip_phy_initialization" field to struct
usb_hcd so drivers can opt-out of any PHY management provided by the USB
HCD core driver. The new field will be used in that patch as well.

This also updates the existing drivers so they use the new flag if they
want to opt out of the PHY management provided by the USB HCD core
driver. This means that for these drivers the new "multiple PHY"
handling (which will be added in a follow-up patch) will be disabled as
well.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
---

quoted

--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h

@@ -98,6 +98,12 @@ struct usb_hcd {
       */
      const struct hc_driver  *driver;        /* hw-specific hooks */

+     /*
+      * do not manage the PHY state in the HCD core, instead let the driver
+      * handle this (for example if the PHY can only be turned on after a
+      * specific event)
+      */
+     bool skip_phy_initialization;

Instead of declaring this as a bool at some random location in the
structure, it would be better to make this a bitflag along with the
other ones that get set at registration.  For example, it could come
right after the remove_phy flag.

I'll move it to the other bitflags as suggested - thanks for pointing this out!

just to save you from reviewing this over and over again:
- I'll move the skip_phy_initialization field below remove_phy
- it's new definition will be "unsigned skip_phy_initialization:1"
- do you see any issues with the rest of the patch (the "concept" of
using a flag to skip all kinds of PHY initialization)?


Regards
Martin