Primary, secondary and subordinate default bus numbers are 0 in Tegra and
it is expecting SW to program these numbers in configration space.

pci_scan_bridge_extend() function programs these numbers in configuration
space if secondary & subordinate bus numbers are 0 or PCI_REASSIGN_ALL_BUS
flag is set. Since secondary & subordinate default bus numbers are 0,
PCI_REASSIGN_ALL_BUS flag can be removed for Tegra PCIe.

Signed-off-by: Manikanta Maddireddy <redacted>
Acked-by: Thierry Reding <redacted>
---
V3:
* new patch in V3
V4:
* no change in this patch
V5:
* no change in this patch
V6:
* Rebased on lpieralisi/pci/tegra branch

 drivers/pci/host/pci-tegra.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 059aa73d5f76..e4b47ebc91fe 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c

@@ -2293,7 +2293,6 @@ static int tegra_pcie_probe(struct platform_device *pdev)
 
 	tegra_pcie_enable_ports(pcie);
 
-	pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS);
 	host->busnr = pcie->busn.start;
 	host->dev.parent = &pdev->dev;
 	host->ops = &tegra_pcie_ops;

-- 
2.1.4