Re: [PATCH v2 3/6] dt/bindings: Add bindings for Tegra GMI controller

2016-08-24 21:54 GMT+02:00 Mirza Krak [off-list ref]:

2016-08-24 17:56 GMT+02:00 Jon Hunter [off-list ref]:
+

quoted

quoted

+Example with two SJA1000 CAN controllers connected to the GMI bus. We wrap the
+controllers with a simple-bus node since they are all connected to the same
+chip-select (CS4), in this example external address decoding is provided:
+
+gmi@70090000 {
+     compatible = "nvidia,tegra20-gmi";
+     reg = <0x70009000 0x1000>;
+     #address-cells = <1>;
+     #size-cells = <1>;
+     clocks = <&tegra_car TEGRA20_CLK_NOR>;
+     clock-names = "gmi";
+     resets = <&tegra_car 42>;
+     reset-names = "gmi";
+     ranges = <4 0x48000000 0x7ffffff>;
+
+     status = "disabled";
+
+     bus@4 {
+             compatible = "simple-bus";
+             reg = <4>;
+             #address-cells = <1>;
+             #size-cells = <1>;
+             ranges = <0 4 0x40100>;

Does this work? I tried to add an example like this and I got ...

Warning (reg_format): "reg" property in /gmi@70009000/bus@4 has invalid
length (4 bytes) (#address-cells == 1, #size-cells == 1)

Shoot, to get rid of the warning it should be

reg = <4 0 >;

But it works either way.

quoted

I am wondering if we should just following the arm,pl172 example and
have ...

        cs4 {
                compatible = "simple-bus";
                #address-cells = <1>;
                #size-cells = <1>;
                ranges;

                nvidia,snor-cs = <4>;
                nvidia,snor-mux-mode;
                nvidia,snor-adv-inv;

                can@0 {
                        reg = <0 0x100>;
                        ...
                };

                ...
        };

That means to go back to V1 really (almost :)). Which I do not mind.
Will give it a test run.

But I am a little hesitant if will be any better/cleaner. In your example above:

can@0 {
         reg = <0 0x100>;
         ...
};

Would this really translate correctly? In the pl172 example they have
multiple ranges and address with "flash@0,0" which a range defined in
parent node. "can@0" does not have valid match in parent node in our
example. So I probably need add some more logic for it to properly
translate.

I have an idea which is following:

gmi@70090000 {
         status = "okay";
         #address-cells = <2>;
         #size-cells = <1>;
         ranges = <4 0 0x48000000 0x00040000>;

         cs4 {
                 compatible = "simple-bus";
                 #address-cells = <2>;
                 #size-cells = <1>;
                 ranges;

                 nvidia,snor-cs = <4>;
                 nvidia,snor-mux-mode;
                 nvidia,snor-adv-inv;

                 can@0 {
                         compatible = "nxp,sja1000";
                         reg = <4 0 0x100>;
                         ...
                 };


                 can@40000 {
                         compatible = "nxp,sja1000";
                         reg = <4 0x40000 0x100>;
                         ...
                 };
         };
};

Do not know if above will work at all (not able to test at current
location), anyway I will play around with it some more and get back to
you.

Gave above a test run and it works like a charm. Are we happy with that?

Best Regards
Mirza
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html