On Monday 24 October 2011 22:16:15 Stephen Warren wrote:

Marc Dietrich wrote at Saturday, October 22, 2011 2:17 PM:

quoted

* NOT FOR COMMIT *

This just adds the dts for paz00. I like to add it to board-dt as
well as soon as I find out which tree to base it on.

...

quoted

+++ b/arch/arm/boot/dts/tegra-paz00.dts

One thing that cross my mind when writing the TrimSlice support and I
forgot to mention: Should these files be named ${soc}-${board}.dts or
${vendor}-${board}.dts (tegra-paz00.dts or toshiba-paz00.dts or
compal-paz00.dts). I'm OK either way; just want to follow any outside
expectations.

I also don't know. I prefer compal for paz00 because Toshiba's code name was 
procyon (I think) and I don't want to change all the naming. Also Toshiba 
showed no interest in helping us, so I don't see why they should get the fame.

quoted

@@ -0,0 +1,51 @@
+/dts-v1/;
+
+/memreserve/ 0x1c000000 0x04000000;
+/include/ "tegra20.dtsi"
+
+/ {
+	model = "Toshiba AC100 / Dynabook AZ";
+	compatible = "compal,paz00", "nvidia,tegra20";
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mmcblk1p1";
+	};
+
+	memory@0 {

The other boards just have "memory" here; which is wrong?

I just copy-pasted from harmony, I guess it doesn't matter.

...

quoted

+	i2c@7000c500 {
+		clock-frequency = <80000>;

That's a pretty odd I2C frequency...

no, 80000 is even ;-) Seriously, it just reflects the fact that the embedded 
controller bus runs at 80kHz. Even more seriously, reading "booting-without-
of.txt" in the Documentation/devicetree dir,

      | o PowerPC,970@0
      |   |- name = "PowerPC,970"
      |   |- device_type = "cpu"
      |   |- reg = <0>
      |   |- clock-frequency = <5f5e1000>
      |   |- 64-bit
      |   |- linux,phandle = <2>

 it looks like all clock-frequency values are hexadecimal. In this case even 
<400000> would be wrong (or the docu is --- ok, the docu is wrong).

Marc