[PATCH 2/2] ARM: mxs: Update DENX M28 machine and dts file
From: Marek Vasut <hidden>
Date: 2012-08-24 03:25:42
Also in:
linux-arm-kernel
Subsystem:
arm port, the rest · Maintainers:
Russell King, Linus Torvalds
Update the mach-mxs machine by removing the enet_clkout(). The new revision of the board doesn't need that. Also, update the DTS file with all the new drivers pulled in the mainline recently, that is, SPI, LRADC, USB. Also, remove bogus AUART3. Signed-off-by: Marek Vasut <redacted> Cc: Chris Ball <redacted> Cc: Fabio Estevam <redacted> Cc: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> Cc: Shawn Guo <redacted> --- arch/arm/boot/dts/imx28-m28evk.dts | 98 +++++++++++++++++++++++++++++++++--- arch/arm/mach-mxs/mach-mxs.c | 1 - 2 files changed, 92 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 183a3fd..e418b75 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts@@ -23,6 +23,8 @@ apb@80000000 { apbh@80000000 { gpmi-nand@8000c000 { + #address-cells = <1>; + #size-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; status = "okay";
@@ -62,9 +64,28 @@ &mmc0_sck_cfg>; bus-width = <8>; wp-gpios = <&gpio3 10 1>; + vmmc-supply = <®_vddio_sd0>; status = "okay"; }; + ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + spi-max-frequency = <40000000>; + m25p,fast-read; + reg = <0>; + }; + }; + pinctrl@80018000 { pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>;
@@ -72,8 +93,11 @@ hog_pins_a: hog-gpios@0 { reg = <0>; fsl,pinmux-ids = < + 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ 0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */ 0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */ + 0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */ + 0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>;
@@ -90,6 +114,22 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + usb0_pins_a: usb0@0 { + reg = <0>; + fsl,pinmux-ids = <0x2152>; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + usb1_pins_a: usb1@0 { + reg = <0>; + fsl,pinmux-ids = <0x2142>; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; }; lcdif@80030000 {
@@ -99,6 +139,10 @@ status = "okay"; }; + lradc@80050000 { + status = "okay"; + }; + can0: can@80032000 { pinctrl-names = "default"; pinctrl-0 = <&can0_pins_a>;
@@ -129,6 +173,7 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; + clock-frequency = <400000>; status = "okay"; sgtl5000: codec@0a {
@@ -157,26 +202,41 @@ status = "okay"; }; - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; + usbphy0: usbphy@8007c000 { status = "okay"; }; - auart3: serial@80070000 { + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + + auart0: serial@8006a000 { pinctrl-names = "default"; - pinctrl-0 = <&auart3_pins_a>; + pinctrl-0 = <&auart0_2pins_a>; status = "okay"; }; }; }; ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_a>; + status = "okay"; + }; + + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + status = "okay"; + }; + mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio3 11 0>; status = "okay"; };
@@ -198,6 +258,32 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 12 0>; + enable-active-low; + }; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 13 0>; + enable-active-low; + }; }; sound {
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 8dabfe8..5ac45a1 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c@@ -241,7 +241,6 @@ static void __init imx28_evk_init(void) static void __init m28evk_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_DENX); mxsfb_pdata.mode_list = m28evk_video_modes;
--
1.7.10.4
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/