[PATCH v4 1/2] of: add J-Core SPI master bindings
From: Rich Felker <dalias@libc.org>
Date: 2016-07-28 06:13:55
Also in:
linux-devicetree, linux-spi, lkml
Subsystem:
open firmware and flattened device tree bindings, spi subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Mark Brown, Linus Torvalds
Signed-off-by: Rich Felker <dalias@libc.org> --- .../devicetree/bindings/spi/jcore,spi.txt | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/jcore,spi.txt
diff --git a/Documentation/devicetree/bindings/spi/jcore,spi.txt b/Documentation/devicetree/bindings/spi/jcore,spi.txt
new file mode 100644
index 0000000..815106d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/jcore,spi.txt@@ -0,0 +1,30 @@ +J-Core SPI master + +Required properties: + +- compatible: Must be "jcore,spi2". + +- reg: Memory region for registers. + +- #address-cells: Must be 1. + +- #size-cells: Must be 0. + +Optional properties: + +- clock-frequency: Specifies an input clock frequency relative to + which the SPI clock speed must be programmed. Necessary only if + the input clock rate is something other than 50 MHz. + +See spi-bus.txt for additional properties not specific to this device. + +Example: + +spi@40 { + compatible = "jcore,spi2"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40 0x8>; + spi-max-frequency = <25000000>; + clock-frequency = <50000000>; +}
--
2.8.1