Re: [PATCH/RFC v4 net-next] ravb: Add dma queue interrupt support

From
Simon Horman <horms@verge.net.au>
Date
2016-01-27 01:49:44
Also in
netdev
Reply to
Sergei Shtylyov, 2016-01-26
On Tue, Jan 26, 2016 at 10:00:34PM +0300, Sergei Shtylyov wrote:
Hello.

   Yoshihiro-san, there was no need to hurry -- net-next is still closed and
by posting this patch to netdev you're only making DaveM upset...
True.
On 01/26/2016 03:23 AM, Simon Horman wrote:
quoted
quoted
From: Kazuya Mizuguchi <redacted>

This patch supports the following interrupts.

- One interrupt for multiple (descriptor, error, management)
- One interrupt for emac
- Four interrupts for dma queue (best effort rx/tx, network control rx/tx)

This patch improve efficiency of the interrupt handler by adding the
interrupt handler corresponding to each interrupt source described
above. Additionally, it reduces the number of times of the access to
EthernetAVB IF.

Signed-off-by: Kazuya Mizuguchi <redacted>
Signed-off-by: Yoshihiro Kaneko <redacted>
I have tested this patch and the result seems positive.
   Tested on gen3 only I guess?
Yes, that is correct.
quoted
Please let me know if any more/different testing would help.
   Sanity testing on some gen2 SoC wouldn't hurt (if you have time).
I don't believe that I have access to a gen2 board (+ extra hardware ?)
where ravb works. If you do would it be possible for you to do a sanity
test?
Thread (18 messages) 18 messages, 3 authors, last reply 2016-02-25
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help