On Fri, Sep 12, 2014 at 10:58:37AM +0200, Geert Uytterhoeven wrote:
Hi Ulrich,
I know this is not your fault, but...
On Fri, Sep 12, 2014 at 10:51 AM, Ulrich Hecht
[off-list ref] wrote:
quoted
+ reg_1p8v: regulator@0 {
As there is no "reg" property, the "@0" must not be present.
However, in the absence of a unit-address, the node name must be unique.
Bother.
Ulrich, could you correct this and other problems raised
by Geert in relation to other patches; rebase this series;
and repost?
Ideally I would like to include these patches early
on in the cycle for v3.19.
quoted
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3p3v: regulator@1 {
Likewise.
quoted
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html