[PATCH 03/16] video: Add DT binding documentation for VGA connector
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: 2014-08-27 16:41:00
Also in:
dri-devel, linux-devicetree, linux-fbdev
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The VGA connector is described by a single input port and an optional DDC bus. Cc: devicetree@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- .../devicetree/bindings/video/vga-connector.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/vga-connector.txt
diff --git a/Documentation/devicetree/bindings/video/vga-connector.txt b/Documentation/devicetree/bindings/video/vga-connector.txt
new file mode 100644
index 0000000..9a45ec1
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/vga-connector.txt@@ -0,0 +1,28 @@ +VGA Connector +======= + +Required properties: +- compatible: "vga-connector" + +Optional properties: +- label: a symbolic name for the connector +- ddc-i2c-bus: phandle to the I2C bus that is connected to VGA DDC + +Required nodes: +- Video port for VGA input + +Example +------- + +vga0: connector@0 { + compatible = "vga-connector"; + label = "vga"; + + ddc-i2c-bus = <&i2c3>; + + port { + vga_connector_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; +};
--
1.8.5.5