Re: [PATCH] mmc: sh_mmcif: Support MMC_SLEEP_AWAKE command
From: Ulf Hansson <hidden>
Date: 2012-06-20 11:54:33
Also in:
linux-mmc
Hi Laurent, Your issue seem more related to a mmc protocol problem. Likely caused by a bad patch for eMMC 4.5 poweroff notify. The patch I refer to is: "mmc: core: Fix PowerOff Notify suspend/resume" You may try to revert this patch and see if the same problem occurs for you. We are trying to fix the issue inserted by the above commit in a patch named: "MMC-4.5 Power OFF Notify Rework", please have a look if you have the time. Kind regards Ulf Hansson On 12 June 2012 22:56, Laurent Pinchart [off-list ref] wrote:
quoted hunk ↗ jump to hunk
The MMC_SLEEP_AWAKE and SD_IO_SEND_OP_COND commands share the same opcode. SD_IO_SEND_OP_COND isn't supported by the SH MMCIF, but MMC_SLEEP_AWAKE is. Discriminate between the two commands using the command flags, and reject SD_IO_SEND_OP_COND only. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- drivers/mmc/host/sh_mmcif.c | 14 ++++---------- 1 files changed, 4 insertions(+), 10 deletions(-) Not supporting the MMC_SLEEP_AWAKE command makes system suspend fail if an MMC or eMMC device supporting sleep/wake is connected. The issue has been first noticed on the Armadillo 800 EVA board.diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 724b35e..e32da11 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c@@ -892,21 +892,15 @@ static void sh_mmcif_request(struct mmc_host *mmc, struct mmc_request *mrq)switch (mrq->cmd->opcode) { /* MMCIF does not support SD/SDIO command */ - case SD_IO_SEND_OP_COND: + case MMC_SLEEP_AWAKE: /* = SD_IO_SEND_OP_COND (5) */ + case MMC_SEND_EXT_CSD: /* = SD_SEND_IF_COND (8) */ + if ((mrq->cmd->flags & MMC_CMD_MASK) != MMC_CMD_BCR) + break; case MMC_APP_CMD: host->state = STATE_IDLE; mrq->cmd->error = -ETIMEDOUT; mmc_request_done(mmc, mrq); return; - case MMC_SEND_EXT_CSD: /* = SD_SEND_IF_COND (8) */ - if (!mrq->data) { - /* send_if_cond cmd (not support) */ - host->state = STATE_IDLE; - mrq->cmd->error = -ETIMEDOUT; - mmc_request_done(mmc, mrq); - return; - } - break; default: break; } -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html