[PATCH V3 6/6] tty: serial: meson: Change request_irq to devm_request_irq and move devm_request_irq to meson_uart_probe()
From: Yu Tu <hidden>
Date: 2021-12-30 10:23:03
Also in:
linux-amlogic, linux-arm-kernel, lkml
Subsystem:
the rest, tty layer and serial drivers · Maintainers:
Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
Because an interrupt error occurs when the user opens /dev/ttyAML* but don't close it, and then opens the same port again. This problem is encountered in actual projects. Signed-off-by: Yu Tu <redacted> --- drivers/tty/serial/meson_uart.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 45e41f20cba3..0dd3f5b35768 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c@@ -135,8 +135,6 @@ static void meson_uart_shutdown(struct uart_port *port) unsigned long flags; u32 val; - free_irq(port->irq, port); - spin_lock_irqsave(&port->lock, flags); val = readl(port->membase + AML_UART_CONTROL);
@@ -284,7 +282,6 @@ static void meson_uart_reset(struct uart_port *port) static int meson_uart_startup(struct uart_port *port) { u32 val; - int ret; meson_uart_reset(port);
@@ -298,10 +295,7 @@ static int meson_uart_startup(struct uart_port *port) val = (AML_UART_RECV_IRQ(1) | AML_UART_XMIT_IRQ(port->fifosize / 2)); writel(val, port->membase + AML_UART_MISC); - ret = request_irq(port->irq, meson_uart_interrupt, 0, - port->name, port); - - return ret; + return 0; } static void meson_uart_change_speed(struct uart_port *port, unsigned long baud)
@@ -908,6 +902,14 @@ static int meson_uart_probe(struct platform_device *pdev) meson_ports[pdev->id] = port; platform_set_drvdata(pdev, port); + ret = devm_request_irq(&pdev->dev, port->irq, meson_uart_interrupt, + 0, dev_name(&pdev->dev), port); + if (ret) { + dev_err(&pdev->dev, "failed to request uart irq: %d\n", + ret); + return ret; + } + /* reset port before registering (and possibly registering console) */ meson_uart_reset(port);
--
2.33.1