Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
From: Shawn Guo <shawnguo@kernel.org>
Date: 2021-12-06 02:17:15
Also in:
linux-arm-kernel, linux-devicetree, linux-i2c, linux-mmc, linux-spi, linux-watchdog, lkml
Possibly related (same subject, not in this thread)
- 2021-12-06 · Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp · Shawn Guo <shawnguo@kernel.org>
On Fri, Nov 26, 2021 at 03:40:01PM +0800, Peng Fan (OSS) wrote:
From: Jacky Bai <ping.bai@nxp.com>
Add the basic dtsi support for i.MX8ULP.
i.MX 8ULP is part of the ULP family with emphasis on extreme
low-power techniques using the 28 nm fully depleted silicon on
insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be
based on asymmetric architecture, however will add a third DSP
domain for advanced voice/audio capability and a Graphics domain
where it is possible to access graphics resources from the
application side or the realtime side.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
- v6
rebase
- v5
Add R-b tag
- v4
Fix build error after rebase
Drop usb nodes and alias, drop fec node
- v3 changes:
no
- v2 changes:
update the license
update the compatible property for usb related node
.../boot/dts/freescale/imx8ulp-pinfunc.h | 978 ++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 396 +++++++
2 files changed, 1374 insertions(+)
create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h
create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi<snip>
quoted hunk
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi new file mode 100644 index 000000000000..fb8714379026 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi@@ -0,0 +1,396 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 NXP + */ + +#include <dt-bindings/clock/imx8ulp-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "imx8ulp-pinfunc.h" + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + gpio0 = &gpiod; + gpio1 = &gpioe; + gpio2 = &gpiof; + mmc0 = &usdhc0; + mmc1 = &usdhc1; + mmc2 = &usdhc2; + serial0 = &lpuart4; + serial1 = &lpuart5; + serial2 = &lpuart6; + serial3 = &lpuart7; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + A35_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@2d400000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x2d400000 0 0x10000>, /* GIC Dist */ + <0x0 0x2d440000 0 0xc0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ + }; + + frosc: clock-frosc { + compatible = "fixed-clock"; + clock-frequency = <192000000>; + clock-output-names = "frosc"; + #clock-cells = <0>; + }; + + lposc: clock-lposc { + compatible = "fixed-clock"; + clock-frequency = <1000000>; + clock-output-names = "lposc"; + #clock-cells = <0>; + }; + + rosc: clock-rosc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "rosc"; + #clock-cells = <0>; + }; + + sosc: clock-sosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "sosc"; + #clock-cells = <0>; + }; + + soc@0 {
Why do we need unit-address @0 here?
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x40000000>;
+
+ per_bridge3: bus@29000000 {
+ compatible = "simple-bus";
+ reg = <0x29000000 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ wdog3: watchdog@292a0000 {
+ compatible = "fsl,imx8ulp-wdt", "fsl,imx7ulp-wdt";
+ reg = <0x292a0000 0x10000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
+ assigned-clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>;
+ timeout-sec = <40>;
+ };
+
+ cgc1: clock-controller@292c0000 {
+ compatible = "fsl,imx8ulp-cgc1";
+ reg = <0x292c0000 0x10000>;
+ clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>;
+ clock-names = "rosc", "sosc", "frosc", "lposc";
+ #clock-cells = <1>;
+ };
+
+ pcc3: clock-controller@292d0000 {
+ compatible = "fsl,imx8ulp-pcc3";
+ reg = <0x292d0000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ tpm5: tpm@29340000 {
+ compatible = "fsl,imx8ulp-tpm", "fsl,imx7ulp-tpm";
+ reg = <0x29340000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_TPM5>,
+ <&pcc3 IMX8ULP_CLK_TPM5>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ lpi2c4: i2c@29370000 {
+ compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x29370000 0x10000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>,
+ <&pcc3 IMX8ULP_CLK_LPI2C4>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+ assigned-clock-rates = <48000000>;
+ status = "disabled";
+ };
+
+ lpi2c5: i2c@29380000 {
+ compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x29380000 0x10000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>,
+ <&pcc3 IMX8ULP_CLK_LPI2C5>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+ assigned-clock-rates = <48000000>;
+ status = "disabled";
+ };
+
+ lpuart4: serial@29390000 {
+ compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x29390000 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_LPUART4>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart5: serial@293a0000 {
+ compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x293a0000 0x1000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_LPUART5>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpspi4: spi@293b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
+ reg = <0x293b0000 0x10000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>,
+ <&pcc3 IMX8ULP_CLK_LPSPI4>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+ assigned-clock-rates = <16000000>;
+ status = "disabled";
+ };
+
+ lpspi5: spi@293c0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
+ reg = <0x293c0000 0x10000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>,
+ <&pcc3 IMX8ULP_CLK_LPSPI5>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+ assigned-clock-rates = <16000000>;
+ status = "disabled";
+ };
+ };
+
+ per_bridge4: bus@29800000 {
+ compatible = "simple-bus";
+ reg = <0x29800000 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pcc4: clock-controller@29800000 {
+ compatible = "fsl,imx8ulp-pcc4";
+ reg = <0x29800000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ lpi2c6: i2c@29840000 {
+ compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x29840000 0x10000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>,
+ <&pcc4 IMX8ULP_CLK_LPI2C6>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+ assigned-clock-rates = <48000000>;
+ status = "disabled";
+ };
+
+ lpi2c7: i2c@29850000 {
+ compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x29850000 0x10000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>,
+ <&pcc4 IMX8ULP_CLK_LPI2C7>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
+ assigned-clock-rates = <48000000>;
+ status = "disabled";
+ };
+
+ lpuart6: serial@29860000 {
+ compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x29860000 0x1000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_LPUART6>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart7: serial@29870000 {
+ compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x29870000 0x1000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_LPUART7>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ iomuxc1: pinctrl@298c0000 {
+ compatible = "fsl,imx8ulp-iomuxc1";I know this binding is already landed. Just curious why there is a suffix number in the compatible. Shawn
+ reg = <0x298c0000 0x10000>;
+ };
+
+ usdhc0: mmc@298d0000 {
+ compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
+ reg = <0x298d0000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+ <&cgc1 IMX8ULP_CLK_XBAR_AD_DIVPLAT>,
+ <&pcc4 IMX8ULP_CLK_USDHC0>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc1: mmc@298e0000 {
+ compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
+ reg = <0x298e0000 0x10000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+ <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
+ <&pcc4 IMX8ULP_CLK_USDHC1>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc2: mmc@298f0000 {
+ compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
+ reg = <0x298f0000 0x10000>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+ <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
+ <&pcc4 IMX8ULP_CLK_USDHC2>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+ };
+
+ gpioe: gpio@2d000000 {
+ compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+ reg = <0x2d000080 0x1000>, <0x2d000040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>,
+ <&pcc4 IMX8ULP_CLK_PCTLE>;
+ clock-names = "gpio", "port";
+ gpio-ranges = <&iomuxc1 0 32 24>;
+ };
+
+ gpiof: gpio@2d010000 {
+ compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+ reg = <0x2d010080 0x1000>, <0x2d010040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>,
+ <&pcc4 IMX8ULP_CLK_PCTLF>;
+ clock-names = "gpio", "port";
+ gpio-ranges = <&iomuxc1 0 64 32>;
+ };
+
+ per_bridge5: bus@2d800000 {
+ compatible = "simple-bus";
+ reg = <0x2d800000 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ cgc2: clock-controller@2da60000 {
+ compatible = "fsl,imx8ulp-cgc2";
+ reg = <0x2da60000 0x10000>;
+ clocks = <&sosc>, <&frosc>;
+ clock-names = "sosc", "frosc";
+ #clock-cells = <1>;
+ };
+
+ pcc5: clock-controller@2da70000 {
+ compatible = "fsl,imx8ulp-pcc5";
+ reg = <0x2da70000 0x10000>;
+ #clock-cells = <1>;
+ };
+ };
+
+ gpiod: gpio@2e200000 {
+ compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+ reg = <0x2e200080 0x1000>, <0x2e200040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pcc5 IMX8ULP_CLK_RGPIOD>,
+ <&pcc5 IMX8ULP_CLK_RGPIOD>;
+ clock-names = "gpio", "port";
+ gpio-ranges = <&iomuxc1 0 0 24>;
+ };
+ };
+};
--
2.25.1