[PATCH v1 2/2] serial: 8250_pericom: Re-enable higher baud rates
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: 2021-11-17 14:58:18
Also in:
lkml
Subsystem:
8250/16?50 (and clone uarts) serial driver, the rest, tty layer and serial drivers · Maintainers:
Greg Kroah-Hartman, Linus Torvalds, Jiri Slaby
From: Jay Dolan <redacted> Add UPF_MAGIC_MULTIPLIER to the port flags since there is now range checking in serial8250_get_baud_rate() in 8250_port.c. Signed-off-by: Jay Dolan <redacted> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/tty/serial/8250/8250_pericom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_pericom.c b/drivers/tty/serial/8250/8250_pericom.c
index 322c3b743a38..e1b6a64da5c9 100644
--- a/drivers/tty/serial/8250/8250_pericom.c
+++ b/drivers/tty/serial/8250/8250_pericom.c@@ -119,7 +119,7 @@ static int pericom8250_probe(struct pci_dev *pdev, const struct pci_device_id *i uart.port.private_data = pericom; uart.port.iotype = UPIO_MEM; uart.port.uartclk = PERICOM8250_DEFAUL_BAUD_RATE * 16; - uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ | UPF_MAGIC_MULTIPLIER; uart.port.set_divisor = pericom_do_set_divisor; for (i = 0; i < nr && i < maxnr; i++) { unsigned int offset = (i == 3 && nr == 4) ? 0x38 : i * 0x8;
--
2.33.0