[PATCH v4 16/16] RISC-V: Add BeagleV Starlight Beta device tree
From: Emil Renner Berthing <kernel@esmil.dk>
Date: 2021-11-16 15:06:42
Also in:
linux-clk, linux-devicetree, linux-gpio, linux-riscv, lkml
Subsystem:
risc-v architecture, starfive devicetrees, the rest · Maintainers:
Paul Walmsley, Palmer Dabbelt, Albert Ou, Emil Renner Berthing, Conor Dooley, Linus Torvalds
Add initial device tree for the BeagleV Starlight Beta board. About 300 of these boards were sent out as part of a now cancelled BeagleBoard.org project. I2C timing data is based on the device tree in the vendor u-boot port. Heartbeat LED added by Geert. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Co-developed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> --- arch/riscv/boot/dts/Makefile | 1 + arch/riscv/boot/dts/starfive/Makefile | 2 + .../dts/starfive/jh7100-beaglev-starlight.dts | 164 ++++++++++++++++++ 3 files changed, 167 insertions(+) create mode 100644 arch/riscv/boot/dts/starfive/Makefile create mode 100644 arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index fe996b88319e..ff174996cdfd 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile@@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 subdir-y += sifive +subdir-y += starfive subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan subdir-y += microchip
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
new file mode 100644
index 000000000000..0ea1bc15ab30
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/Makefile@@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
new file mode 100644
index 000000000000..c9af67f7a0d2
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts@@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2021 StarFive Technology Co., Ltd. + * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7100.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/pinctrl-starfive.h> + +/ { + model = "BeagleV Starlight Beta"; + compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + timebase-frequency = <6250000>; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x2 0x0>; + }; + + leds { + compatible = "gpio-leds"; + + led-ack { + gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + linux,default-trigger = "heartbeat"; + label = "ack"; + }; + }; +}; + +&gpio { + i2c0_pins: i2c0-0 { + i2c-pins { + pinmux = <GPIOMUX(62, GPO_LOW, + GPO_I2C0_PAD_SCK_OEN, + GPI_I2C0_PAD_SCK_IN)>, + <GPIOMUX(61, GPO_LOW, + GPO_I2C0_PAD_SDA_OEN, + GPI_I2C0_PAD_SDA_IN)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c1_pins: i2c1-0 { + i2c-pins { + pinmux = <GPIOMUX(47, GPO_LOW, + GPO_I2C1_PAD_SCK_OEN, + GPI_I2C1_PAD_SCK_IN)>, + <GPIOMUX(48, GPO_LOW, + GPO_I2C1_PAD_SDA_OEN, + GPI_I2C1_PAD_SDA_IN)>; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + }; + + i2c2_pins: i2c2-0 { + i2c-pins { + pinmux = <GPIOMUX(60, GPO_LOW, + GPO_I2C2_PAD_SCK_OEN, + GPI_I2C2_PAD_SCK_IN)>, + <GPIOMUX(59, GPO_LOW, + GPO_I2C2_PAD_SDA_OEN, + GPI_I2C2_PAD_SDA_IN)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + uart3_pins: uart3-0 { + rx-pins { + pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE, + GPI_UART3_PAD_SIN)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + tx-pins { + pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT, + GPO_ENABLE, GPI_NONE)>; + bias-disable; + drive-strength = <35>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <500>; + i2c-scl-falling-time-ns = <500>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + pmic@5e { + compatible = "ti,tps65086"; + reg = <0x5e>; + gpio-controller; + #gpio-cells = <2>; + + regulators { + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <100>; + i2c-scl-falling-time-ns = <100>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <500>; + i2c-scl-falling-time-ns = <500>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&osc_sys { + clock-frequency = <25000000>; +}; + +&osc_aud { + clock-frequency = <27000000>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +};
--
2.33.1