Re: [PATCH v6] arm pl011 serial: support multi-irq request
From: Robin Murphy <robin.murphy@arm.com>
Date: 2021-08-13 14:37:26
Also in:
lkml
[ +Russell as the listed PL011 maintainer ] On 2021-08-13 04:31, Bing Fan wrote:
quoted hunk ↗ jump to hunk
From: Bing Fan <redacted> In order to make pl011 work better, multiple interrupts are required, such as TXIM, RXIM, RTIM, error interrupt(FE/PE/BE/OE); at the same time, pl011 to GIC does not merge the interrupt lines(each serial-interrupt corresponding to different GIC hardware interrupt), so need to enable and request multiple gic interrupt numbers in the driver. Signed-off-by: Bing Fan <redacted> --- drivers/tty/serial/amba-pl011.c | 39 +++++++++++++++++++++++++++++++-- 1 file changed, 37 insertions(+), 2 deletions(-)diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index e14f3378b8a0..eaac3431459c 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c@@ -1701,6 +1701,41 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h) } } +static void pl011_release_multi_irqs(struct uart_amba_port *uap, unsigned int max_cnt) +{ + struct amba_device *amba_dev = container_of(uap->port.dev, struct amba_device, dev); + int i; + + for (i = 0; i < max_cnt; i++) + if (amba_dev->irq[i]) + free_irq(amba_dev->irq[i], uap);
When you request the IRQs you break at the first zero, so this could potentially try to free IRQs that you haven't requested, if there happen to be any nonzero values beyond that. Maybe that can never happen, but there seems little need for deliberate inconsistency here.
+}
+
+static int pl011_allocate_multi_irqs(struct uart_amba_port *uap)
+{
+ int ret = 0;
+ int i;
+ unsigned int virq;
+ struct amba_device *amba_dev = container_of(uap->port.dev, struct amba_device, dev);
+
+ pl011_write(uap->im, uap, REG_IMSC);
+
+ for (i = 0; i < AMBA_NR_IRQS; i++) {It's not clear where these extra IRQs are expected to come from given that the DT binding explicitly defines only one :/
+ virq = amba_dev->irq[i]; + if (virq == 0) + break; + + ret = request_irq(virq, pl011_int, IRQF_SHARED, dev_name(&amba_dev->dev), uap);
Note that using dev_name() here technically breaks user ABI - scripts looking in /proc for an irq named "uart-pl011" will no longer find it. Furthermore, the "dev" cookie passed to request_irq is supposed to be globally unique, which "uap" isn't once you start registering it multiple times. If firmware did describe all the individual PL011 IRQ outputs on a system where they are muxed to the same physical IRQ anyway, you'd end up registering ambiguous IRQ actions here. Of course in practice you might still get away with that, but it is technically wrong. Robin.
quoted hunk ↗ jump to hunk
+ if (ret) { + dev_err(uap->port.dev, "request %u interrupt failed\n", virq); + pl011_release_multi_irqs(uap, i - 1); + break; + } + } + + return ret; +} + static int pl011_allocate_irq(struct uart_amba_port *uap) { pl011_write(uap->im, uap, REG_IMSC);@@ -1753,7 +1788,7 @@ static int pl011_startup(struct uart_port *port) if (retval) goto clk_dis; - retval = pl011_allocate_irq(uap); + retval = pl011_allocate_multi_irqs(uap); if (retval) goto clk_dis;@@ -1864,7 +1899,7 @@ static void pl011_shutdown(struct uart_port *port) pl011_dma_shutdown(uap); - free_irq(uap->port.irq, uap); + pl011_release_multi_irqs(uap, AMBA_NR_IRQS); pl011_disable_uart(uap);