[PATCH v2 03/11] serial: mvebu-uart: correctly calculate minimal possible baudrate
From: Pali Rohár <pali@kernel.org>
Date: 2021-06-25 14:37:06
Also in:
linux-arm-kernel, linux-clk, lkml
Subsystem:
marvell armada 3700 serial driver, the rest, tty layer and serial drivers · Maintainers:
Pali Rohár, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
For default (x16) scheme which is currently used by mvebu-uart.c driver,
maximal divisor of UART base clock is 1023*16. Therefore there is limit for
minimal supported baudrate. This change calculate it correctly and prevents
setting invalid divisor 0 into hardware registers.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate")
---
drivers/tty/serial/mvebu-uart.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index dc0c26824ddb..f8b0016db847 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c@@ -481,7 +481,7 @@ static void mvebu_uart_set_termios(struct uart_port *port, struct ktermios *old) { unsigned long flags; - unsigned int baud; + unsigned int baud, min_baud, max_baud; spin_lock_irqsave(&port->lock, flags);
@@ -500,16 +500,21 @@ static void mvebu_uart_set_termios(struct uart_port *port, port->ignore_status_mask |= STAT_RX_RDY(port) | STAT_BRK_ERR; /* + * Maximal divisor is 1023 * 16 when using default (x16) scheme. * Maximum achievable frequency with simple baudrate divisor is 230400. * Since the error per bit frame would be of more than 15%, achieving * higher frequencies would require to implement the fractional divisor * feature. */ - baud = uart_get_baud_rate(port, termios, old, 0, 230400); + min_baud = DIV_ROUND_UP(port->uartclk, 1023 * 16); + max_baud = 230400; + + baud = uart_get_baud_rate(port, termios, old, min_baud, max_baud); if (mvebu_uart_baud_rate_set(port, baud)) { /* No clock available, baudrate cannot be changed */ if (old) - baud = uart_get_baud_rate(port, old, NULL, 0, 230400); + baud = uart_get_baud_rate(port, old, NULL, + min_baud, max_baud); } else { tty_termios_encode_baud_rate(termios, baud, baud); uart_update_timeout(port, termios->c_cflag, baud);
--
2.20.1