[PATCH 13/13] serial: stm32: add support for "flush_buffer" ops
From: Erwan Le Ray <hidden>
Date: 2021-02-19 17:52:50
Also in:
linux-arm-kernel, lkml
Subsystem:
the rest, tty layer and serial drivers · Maintainers:
Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
Add the support for "flush_buffer" ops in order to flush any write buffers, reset any DMA state and stop any ongoing DMA transfers when the port->state->xmit circular buffer is cleared. Signed-off-by: Erwan Le Ray <redacted>
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 114408f3892a..92836068e5ec 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c@@ -597,6 +597,19 @@ static void stm32_usart_start_tx(struct uart_port *port) stm32_usart_transmit_chars(port); } +/* Flush the transmit buffer. */ +static void stm32_usart_flush_buffer(struct uart_port *port) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; + + if (stm32_port->tx_ch) { + dmaengine_terminate_async(stm32_port->tx_ch); + stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + stm32_port->tx_dma_busy = false; + } +} + /* Throttle the remote when input buffer is about to overflow. */ static void stm32_usart_throttle(struct uart_port *port) {
@@ -992,6 +1005,7 @@ static const struct uart_ops stm32_uart_ops = { .break_ctl = stm32_usart_break_ctl, .startup = stm32_usart_startup, .shutdown = stm32_usart_shutdown, + .flush_buffer = stm32_usart_flush_buffer, .set_termios = stm32_usart_set_termios, .pm = stm32_usart_pm, .type = stm32_usart_type,
--
2.17.1