On Thu, 5 Jul 2018 14:39:21 +0800 Jisheng Zhang wrote:

<snip>

quoted

quoted

+	serial_port_out(p, UART_LCR, up->lcr | UART_LCR_DLAB);
+	serial_dl_write(up, quot);    

At some point it would be a helper, I think. We can call
serial8250_do_set_divisor() here. So, perhaps we might export it.  

serial8250_do_set_divisor will drop the frac, that's not we want ;)

And most importantly, serial8250_do_set_divisor() will set a wrong BRD(I)
for fractional capable DW uarts. For example, clk = 25MHZ, baud = 115200.

In fractional capable DW uarts, we should set BRD(I) as
25000000/(16*115200) = 13

but serial8250_do_set_divisor() will set BRD(I) as
DIV_ROUND_CLOSEST(25*1000000, 16*115200)) = 14

Thanks