[PATCH v7 3/3] dt-bindings: timer: Add andestech atcpit100 timer binding doc
From: Greentime Hu <hidden>
Date: 2018-02-13 09:13:19
Also in:
linux-arch, linux-devicetree, lkml, netdev
Subsystem:
clocksource, clockevent drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Daniel Lezcano, Thomas Gleixner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Rick Chen <redacted> Add a document to describe Andestech atcpit100 timer and binding information. Signed-off-by: Rick Chen <redacted> Signed-off-by: Greentime Hu <redacted> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> --- .../bindings/timer/andestech,atcpit100-timer.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/andestech,atcpit100-timer.txt
diff --git a/Documentation/devicetree/bindings/timer/andestech,atcpit100-timer.txt b/Documentation/devicetree/bindings/timer/andestech,atcpit100-timer.txt
new file mode 100644
index 000000000000..4c9ea5989e35
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/andestech,atcpit100-timer.txt@@ -0,0 +1,33 @@ +Andestech ATCPIT100 timer +------------------------------------------------------------------ +ATCPIT100 is a generic IP block from Andes Technology, embedded in +Andestech AE3XX platforms and other designs. + +This timer is a set of compact multi-function timers, which can be +used as pulse width modulators (PWM) as well as simple timers. + +It supports up to 4 PIT channels. Each PIT channel is a +multi-function timer and provide the following usage scenarios: +One 32-bit timer +Two 16-bit timers +Four 8-bit timers +One 16-bit PWM +One 16-bit timer and one 8-bit PWM +Two 8-bit timer and one 8-bit PWM + +Required properties: +- compatible : Should be "andestech,atcpit100" +- reg : Address and length of the register set +- interrupts : Reference to the timer interrupt +- clocks : a clock to provide the tick rate for "andestech,atcpit100" +- clock-names : should be "PCLK" for the peripheral clock source. + +Examples: + +timer0: timer@f0400000 { + compatible = "andestech,atcpit100"; + reg = <0xf0400000 0x1000>; + interrupts = <2>; + clocks = <&apb>; + clock-names = "PCLK"; +};
--
2.16.1