On Tue, Jan 23, 2018 at 5:52 PM, Alan Cox [off-list ref] wrote:

On Wed, 17 Jan 2018 09:24:32 -0800
Shankara Pailoor [off-list ref] wrote:

quoted

Hi Greg,

Sorry for that. Here is the stack trace. C Program below

quoted

 serial_in drivers/tty/serial/8250/8250.h:111 [inline]
 wait_for_xmitr+0x8a/0x1d0 drivers/tty/serial/8250/8250_port.c:2033
 serial8250_console_putchar+0x19/0x50 drivers/tty/serial/8250/8250_port.c:3170
 uart_console_write+0x98/0xc0 drivers/tty/serial/serial_core.c:1858

The console is spinning in polled mode trying to write data to the
console port, which it seems has gotten a bit stuck. Could be the
hypervisor hits some kind of buffering limit, could be hypervisor
interface broke.

Either way the console interface is supposed to stall the machine to
ensure the bytes always get out and if your serial port jams or gets
massively behind then this will happen.

+1
https://lkml.org/lkml/2017/12/21/480

-- 
With Best Regards,
Andy Shevchenko