[PATCH v5 06/17] net: qca_spi: remove QCASPI_MTU
From: Stefan Wahren <hidden>
Date: 2017-05-10 08:56:29
Also in:
linux-devicetree, lkml, netdev
Subsystem:
networking drivers, qualcomm atheros qca7k ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Stefan Wahren, Linus Torvalds
There is no need for an additional MTU define. Signed-off-by: Stefan Wahren <redacted> --- drivers/net/ethernet/qualcomm/qca_spi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index a0dbb92..a239ac4 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c@@ -69,7 +69,6 @@ static int qcaspi_pluggable = QCASPI_PLUGGABLE_MIN; module_param(qcaspi_pluggable, int, 0); MODULE_PARM_DESC(qcaspi_pluggable, "Pluggable SPI connection (yes/no)."); -#define QCASPI_MTU QCAFRM_MAX_MTU #define QCASPI_TX_TIMEOUT (1 * HZ) #define QCASPI_QCA7K_REBOOT_TIME_MS 1000
@@ -745,7 +744,7 @@ qcaspi_netdev_init(struct net_device *dev) { struct qcaspi *qca = netdev_priv(dev); - dev->mtu = QCASPI_MTU; + dev->mtu = QCAFRM_MAX_MTU; dev->type = ARPHRD_ETHER; qca->clkspeed = qcaspi_clkspeed; qca->burst_len = qcaspi_burst_len;
--
2.1.4