[PATCH 2/3] ACPI / LPSS: Provide build-in properties of the UART
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Date: 2016-08-22 14:24:24
Also in:
linux-acpi
Subsystem:
acpi, the rest · Maintainers:
"Rafael J. Wysocki", Linus Torvalds
The UART driver, dw8250.c, needs some details regarding the Designware UART. For ACPI enumerated devices the values are hard-coded, but since the driver also reads the values from device properties, providing them with build-in properties. This allows us to later remove the hard-coded values from the driver. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> --- drivers/acpi/acpi_lpss.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 357a0b8..5520102 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c@@ -75,6 +75,7 @@ struct lpss_device_desc { const char *clk_con_id; unsigned int prv_offset; size_t prv_size_override; + struct property_entry *properties; void (*setup)(struct lpss_private_data *pdata); };
@@ -163,11 +164,19 @@ static const struct lpss_device_desc lpt_i2c_dev_desc = { .prv_offset = 0x800, }; +static struct property_entry uart_properties[] = { + PROPERTY_ENTRY_U32("reg-io-width", 4), + PROPERTY_ENTRY_U32("reg-shift", 2), + PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"), + { }, +}; + static const struct lpss_device_desc lpt_uart_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR, .clk_con_id = "baudclk", .prv_offset = 0x800, .setup = lpss_uart_setup, + .properties = uart_properties, }; static const struct lpss_device_desc lpt_sdio_dev_desc = {
@@ -189,6 +198,7 @@ static const struct lpss_device_desc byt_uart_dev_desc = { .clk_con_id = "baudclk", .prv_offset = 0x800, .setup = lpss_uart_setup, + .properties = uart_properties, }; static const struct lpss_device_desc bsw_uart_dev_desc = {
@@ -197,6 +207,7 @@ static const struct lpss_device_desc bsw_uart_dev_desc = { .clk_con_id = "baudclk", .prv_offset = 0x800, .setup = lpss_uart_setup, + .properties = uart_properties, }; static const struct lpss_device_desc byt_spi_dev_desc = {
@@ -440,6 +451,12 @@ static int acpi_lpss_create_device(struct acpi_device *adev, goto err_out; } + if (dev_desc->properties) { + ret = device_add_properties(&adev->dev, dev_desc->properties); + if (ret) + goto err_out; + } + adev->driver_data = pdata; pdev = acpi_create_platform_device(adev); if (!IS_ERR_OR_NULL(pdev)) {
--
2.8.1