[PATCH v4 1/2] serial: 8250_dw: make dw8250_set_termios as default set_termios callback
From: Kefeng Wang <hidden>
Date: 2016-08-31 03:31:33
Also in:
linux-acpi, lkml
Subsystem:
8250/16?50 (and clone uarts) serial driver, synopsys designware 8250 uart driver, the rest, tty layer and serial drivers · Maintainers:
Greg Kroah-Hartman, Ilpo Järvinen, Linus Torvalds, Jiri Slaby
Make dw8250_set_termios() handle all cases of dw8250_data->clk properly, then we can safely use dw8250_set_termios() as the default set_termios callback instead of serial8250_do_set_termios(), so do it. Signed-off-by: Kefeng Wang <redacted> --- drivers/tty/serial/8250/8250_dw.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 5c0c123..adecece 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c@@ -235,7 +235,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, unsigned int rate; int ret; - if (IS_ERR(d->clk) || !old) + if (IS_ERR_OR_NULL(d->clk) || !old) goto out; clk_disable_unprepare(d->clk);
@@ -308,13 +308,11 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) p->serial_in = dw8250_serial_in32; data->uart_16550_compatible = true; } - p->set_termios = dw8250_set_termios; } /* Platforms with iDMA */ if (platform_get_resource_byname(to_platform_device(p->dev), IORESOURCE_MEM, "lpss_priv")) { - p->set_termios = dw8250_set_termios; data->dma.rx_param = p->dev->parent; data->dma.tx_param = p->dev->parent; data->dma.fn = dw8250_idma_filter;
@@ -391,6 +389,7 @@ static int dw8250_probe(struct platform_device *pdev) p->iotype = UPIO_MEM; p->serial_in = dw8250_serial_in; p->serial_out = dw8250_serial_out; + p->set_termios = dw8250_set_termios; p->membase = devm_ioremap(&pdev->dev, regs->start, resource_size(regs)); if (!p->membase)
--
1.7.12.4