Thread (4 messages) 4 messages, 2 authors, 2016-03-25

Re: [PATCH] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()

From: Chanwoo Choi <cw00.choi@samsung.com>
Date: 2016-03-25 08:22:39
Also in: linux-samsung-soc, lkml

Dear Marek,

On 2016년 03월 25일 17:14, Marek Szyprowski wrote:
Dear Chanwoo,

On 2016-03-25 01:10, Chanwoo Choi wrote:
quoted
Hi Robert,

I send following patch to fix the broken serial log of Exynos SoC.
As I knew, you also knew this issue.
If possible, could you review or test this patch?
Robert no longer works for Samsung, so I'm afraid that he won't be able to test
this patch.
Ah. Thanks for your reply.
quoted
Best Regards,
Chanwoo Choi

On 2016년 03월 14일 09:41, Chanwoo Choi wrote:
quoted
This patch fixes the broken serial log when changing the clock source
of uart device. Before disabling the original clock source, this patch
enables the new clock source to protect the clock off state for a split second.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
  drivers/tty/serial/samsung.c | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index d72cd736bdc6..80d59dbfebba 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1265,13 +1265,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
      if (ourport->baudclk != clk) {
          s3c24xx_serial_setsource(port, clk_sel);
  +        clk_prepare_enable(clk);
+
IMHO clk_prepare_enable() should be moved before s3c24xx_serial_setsource() to be
really sure that there will be no period of hw operating with disabled baud clock.
Could you check if it works for you?
Yes. I tested it without any problem.
But, as you commented, clk_prepare_enable() should be called before s3c24xx_serial_setsource().

I'll modify it.
quoted
quoted
          if (!IS_ERR(ourport->baudclk)) {
              clk_disable_unprepare(ourport->baudclk);
              ourport->baudclk = ERR_PTR(-EINVAL);
          }
  -        clk_prepare_enable(clk);
-
          ourport->baudclk = clk;
          ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
      }
Best regards
Best Regards,
Chanwoo Choi
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help