On 02/17/2016 07:36 PM, Zheng, Lv wrote:

Hi,

quoted

From: Aleksey Makarov [mailto:aleksey.makarov@linaro.org]
Subject: Re: [PATCH v3 1/5] ACPI: change __init to __ref for
early_acpi_os_unmap_memory()

Hi Lv,

Thank you for review.

On 02/17/2016 05:51 AM, Zheng, Lv wrote:

[..]

quoted

quoted

quoted

early_acpi_os_unmap_memory() is marked as __init because it calls
__acpi_unmap_table(), but only when acpi_gbl_permanent_mmap is not

set.

quoted

quoted

quoted

acpi_gbl_permanent_mmap is set in __init acpi_early_init()
so it is safe to call early_acpi_os_unmap_memory() from anywhere

We need this function to be non-__init because we need access to
some tables at unpredictable time--it may be before or after
acpi_gbl_permanent_mmap is set.  For example, SPCR (Serial Port Console
Redirection) table is needed each time a new console is registered.
It can be quite early (console_initcall) or when a module is inserted.
When this table accessed before acpi_gbl_permanent_mmap is set,
the pointer should be unmapped.  This is exactly what this function
does.

[Lv Zheng]
Why don't you use another API instead of early_acpi_os_unmap_memory()

in

quoted

quoted

case you want to unmap things in any cases.
acpi_os_unmap_memory() should be the one to match this purpose.
It checks acpi_gbl_ppermanent_mmap in acpi_os_unmap_iomem().

As far as I understand, there exist two steps in ACPI initialization:

1. Before acpi_gbl_permanent_mmap is set, tables received with
acpi_get_table_with_size()
   are mapped by early_memremap().  If a subsystem gets such a pointer it
should be unmapped.

2  After acpi_gbl_permanent_mmap is set this pointer should not be unmapped
at all.

[Lv Zheng] 
This statement is wrong, this should be:
As long as there is a __reference__ to the mapped table, the pointer should not be unmapped.
In fact, we have a series to introduce acpi_put_table() to achieve this.
So your argument is wrong from very first point.

quoted

That exactly what early_acpi_os_unmap_memory() does--it checks
acpi_gbl_permanent_mmap.
If I had used acpi_os_unmap_memory() after acpi_gbl_permanent_mmap had
been set,
it would have tried to free that pointer with an oops (actually, I checked that
and got that oops).

So using acpi_os_unmap_memory() is not an option here, but
early_acpi_os_unmap_memory()
match perfectly.

[Lv Zheng] 
I don't think so.
For definition block tables, we know for sure there will always be references, until "Unload" opcode is invoked by the AML interpreter.
But for the data tables, OSPMs should use them in this way:
1. map the table
2. parse the table and convert it to OS specific structures
3. unmap the table
This helps to shrink virtual memory address space usages.

So from this point of view, all data tables should be unmapped right after being parsed.
Why do you need the map to be persistent in the kernel address space?
You can always map a small table, but what if the table size is very big?

quoted

quoted

quoted

And in fact early_acpi_os_unmap_memory() should be removed.

I don't think so -- I have explained why.  It does different thing.
Probably it (and/or other functions in that api) should be renamed.

[Lv Zheng] 
Just let me ask one more question.
eary_acpi_os_unmap_memory() is not used inside of ACPICA.
How ACPICA can work with just acpi_os_unmap_memory()?
You can check drivers/acpi/tbxxx.c.
Especially: acpi_tb_release_temp_table() and the code invoking it.

quoted

quoted

[Lv Zheng]
One more thing is:
If you can't switch your driver to use acpi_os_unmap_memory() instead of

early_acpi_os_unmap_memory(),

quoted

then it implies that your driver does have a defect.

I still don't understand what defect, sorry.

[Lv Zheng] 
If you can't ensure this sequence for using the data tables:
1. map the table
2. parse the table and convert it to OS specific structure
3. unmap the table
It implies there is a bug in the driver or a bug in the ACPI subsystem core.

Exactly.

The central problem here is the way Aleksey is trying to hookup a console.

What should be happening in this series is:
1. early map SPCR
2. parse the SPCR table
3. call add_preferred_console() to add the SPCR console to the console table
4. unmap SPCR

This trivial and unobtrusive method would already have a 8250 console
running via SPCR. I've already pointed this out in previous reviews.

Further, the above method *will be required anyway* for the DBG2 table to
start an earlycon, which I've already pointed out in previous reviews.

Then to enable amba-pl011 console via ACPI, add a console match() method
similar to the 8250 console match() method, univ8250_console_match().

FWIW, PCI earlycon + console support was already submitted once before but
never picked up by GregKH. I think I'll just grab that and re-submit so
you would know what to emit for console options in the add_preferred_console().


Regards,
Peter Hurley

quoted

quoted

There is an early bootup requirement in Linux.
Maps acquired during the early stage should be freed by the driver during the

early stage.

quoted

And the driver should re-acquire the memory map after booting.

Exactly.  That's why I use early_acpi_os_unmap_memory().  The point is that
that code can be
called *before* acpi_gbl_permanent_mmap is set (at early initialization of for
example 8250 console)
or *after* acpi_gbl_permanent_mmap is set (at insertion of a module that
registers a console),
We just can not tell if the received table pointer should or sould not be freed
with early_memunmap()
(actually __acpi_unmap_table() or whatever) without checking
acpi_gbl_permanent_mmap,
but that's all too low level.

[Lv Zheng] 
The driver should make sure that:
Map/unmap is paired during early stage.
For late stage, it should be another pair of map/unmap.

quoted

Another option, as you describe, is to get this pointer early, don't free it

[Lv Zheng] 
I mean you should free it early.

quoted

untill acpi_gbl_permanent_mmap is set, then free it (with
early_acpi_os_unmap_memory(), that's
ok because acpi_gbl_permanent_mmap is set in an init code), then get the
persistent
pointer to the table.  The problem with it is that we can not just watch
acpi_gbl_permanent_mmap
to catch this exact moment.  And also accessing acpi_gbl_permanent_mmap is
not good as it probably is
an implementation detail (i. e. too lowlevel) of the ACPI code.
Or I probably miss what you are suggesting.

[Lv Zheng] 
I mean, you should:
During early stage:
acpi_os_map_memory()
Parse the table.
acpi_os_unmap_memory().

quoted

quoted

This is because, during early bootup stage, there are only limited slots

available for drivers to map memory.

quoted

So by changing __init to __ref here, you probably will hide many such defects.

What defects?  This funcions checks acpi_gbl_permanent_mmap.
BTW, exactly the same thing is done in the beginning of
acpi_os_unmap_memory() and than's ok,
that function is __ref.

quoted

And solving issues in this way doesn't seem to be an improvement.

Could you please tell me where I am wrong?  I still don't understand your point.

[Lv Zheng] 
But anyway, the defect should be in ACPI subsystem core.
The cause should be the API itself - acpi_get_table().

So I agree you can use early_acpi_os_unmap_memory() during the period the root causes are not cleaned up.
But the bottom line is: the driver need to ensure that early_acpi_os_unmap_memory() is always invoked.
As long as you can ensure this, I don't have objections for deploying early_acpi_os_unmap_memory()  for now.

Thanks and best regards
-Lv

quoted

Thank you
Aleksey Makarov

quoted

Thanks and best regards
-Lv

quoted

Thanks and best regards
-Lv

quoted

Signed-off-by: Aleksey Makarov <redacted>
---
 drivers/acpi/osl.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 67da6fb..8a552cd 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c

@@ -497,7 +497,11 @@ void __ref acpi_os_unmap_memory(void *virt,

acpi_size size)
 }
 EXPORT_SYMBOL_GPL(acpi_os_unmap_memory);

-void __init early_acpi_os_unmap_memory(void __iomem *virt, acpi_size

size)

quoted

+/*
+ * acpi_gbl_permanent_mmap is set in __init acpi_early_init()
+ * so it is safe to call early_acpi_os_unmap_memory() from anywhere
+ */
+void __ref early_acpi_os_unmap_memory(void __iomem *virt, acpi_size

size)

quoted

 {
 	if (!acpi_gbl_permanent_mmap)
 		__acpi_unmap_table(virt, size);
--
2.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html