[PATCH v7 1/3] tty: Move serial8250_stop_rx in front of serial8250_start_tx
From: Matwey V. Kornilov <hidden>
Date: 2016-01-19 20:33:59
Also in:
lkml
Subsystem:
8250/16?50 (and clone uarts) serial driver, the rest, tty layer and serial drivers · Maintainers:
Greg Kroah-Hartman, Linus Torvalds, Jiri Slaby
Software RS485 emultaion is to be added in the following commit. serial8250_start_tx will need to refer serial8250_stop_rx. Move serial8250_stop_rx in front of serial8250_start_tx in order to avoid function forward declaration. Signed-off-by: Matwey V. Kornilov <redacted> --- drivers/tty/serial/8250/8250_port.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 8d262bc..b82fcae 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c@@ -1304,6 +1304,19 @@ static void autoconfig_irq(struct uart_8250_port *up) port->irq = (irq > 0) ? irq : 0; } +static void serial8250_stop_rx(struct uart_port *port) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + serial8250_rpm_get(up); + + up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); + up->port.read_status_mask &= ~UART_LSR_DR; + serial_port_out(port, UART_IER, up->ier); + + serial8250_rpm_put(up); +} + static inline void __stop_tx(struct uart_8250_port *p) { if (p->ier & UART_IER_THRI) {
@@ -1371,19 +1384,6 @@ static void serial8250_unthrottle(struct uart_port *port) port->unthrottle(port); } -static void serial8250_stop_rx(struct uart_port *port) -{ - struct uart_8250_port *up = up_to_u8250p(port); - - serial8250_rpm_get(up); - - up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); - up->port.read_status_mask &= ~UART_LSR_DR; - serial_port_out(port, UART_IER, up->ier); - - serial8250_rpm_put(up); -} - static void serial8250_disable_ms(struct uart_port *port) { struct uart_8250_port *up =
--
2.7.0