On Mon, Jun 9, 2014 at 5:35 PM, Tony Luck [off-list ref] wrote:

On Mon, Jun 9, 2014 at 3:25 PM, Tony Luck [off-list ref] wrote:

quoted

Linus' tree (HEAD=963649d735c8) is spitting out all sorts of garbage
on the serial console - as if the baud rate is being periodically set
to something weird, and then back to 112500.  I see over a dozen
blocks of junk interspersed with good output.

Ah - it seems that I need to be more specific on the cmdline

     console=uart8250,io,0x3f8,115200

makes all the garbage disappear.

Do I need to update: Documentation/ia64/serial.txt
which has the example of "console=uart,io,0x3f8"?

It should do auto detect of the baud-rate if it is not specified which
for 8250 is just reading the baud-rate divider and calculating the
baud-rate using the uart clock. It should just reprogram the divider
with the same divider value. I don't see anything obvious why this
would have broken.

Rob