Re: [RFT/PATCH] serial: omap: prevent resume if device is not suspended.
From: Tony Lindgren <tony@atomide.com>
Date: 2012-10-12 21:52:08
Also in:
linux-arm-kernel, linux-omap, lkml
Possibly related (same subject, not in this thread)
- 2012-10-15 · Re: [RFT/PATCH] serial: omap: prevent resume if device is not suspended. · Kevin Hilman <hidden>
- 2012-10-12 · Re: [RFT/PATCH] serial: omap: prevent resume if device is not suspended. · Russell King - ARM Linux <hidden>
- 2012-10-12 · Re: [RFT/PATCH] serial: omap: prevent resume if device is not suspended. · Russell King - ARM Linux <hidden>
- 2012-10-12 · Re: [RFT/PATCH] serial: omap: prevent resume if device is not suspended. · Kevin Hilman <hidden>
- 2012-10-12 · RE: [RFT/PATCH] serial: omap: prevent resume if device is not suspended. · Poddar, Sourav <hidden>
* Kevin Hilman [off-list ref] [121012 13:34]:
I'm not conviced (yet) that a mismatch is the root cause. Yes, that's what the author of $SUBJECT patch assumed and stated, but I'm not pursuaded. If it's an improperly configured mux issue, then the UART will break whenever the device is actually omap_device_enable'd, whether in the driver or in the bus layer.
I tried booting n800 here with CONFIG_OMAP_MUX disabled, and no change. Serial console output stops right when the console initializes. Regards, Tony