[PATCH 04/11] tty/serial/core: Introduce poll_init callback
STALE5119d
REVIEWED: 1 (0M)
From: Anton Vorontsov <hidden>
Date: 2012-09-24 21:32:07
Also in:
linux-arm-kernel, lkml
Subsystem:
the rest, tty layer and serial drivers · Maintainers:
Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
Revision v9 of 9 in this series; 1 review trailer.
Revisions (9)
It was noticed that polling drivers (like KGDB) are not able to use serial ports if the ports were not previously initialized via console. I.e. when booting with console=ttyAMA0 kgdboc=ttyAMA0, everything works fine, but with console=ttyFOO kgdboc=ttyAMA0, the kgdboc doesn't work. This is because we don't initialize the hardware. Calling ->startup() is not an option, because drivers request interrupts there, and drivers fail to handle situations when tty isn't opened with interrupts enabled. So, we have to implement a new callback (actually, tty_ops already have a similar callback), which does everything needed to initialize just the hardware. Signed-off-by: Anton Vorontsov <redacted> Acked-by: Alan Cox <redacted> --- drivers/tty/serial/serial_core.c | 17 +++++++++++++++++ include/linux/serial_core.h | 1 + 2 files changed, 18 insertions(+)
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 78036c5..0fcfd98a 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c@@ -2129,6 +2129,7 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options) int bits = 8; int parity = 'n'; int flow = 'n'; + int ret; if (!state || !state->uart_port) return -1;
@@ -2137,6 +2138,22 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options) if (!(port->ops->poll_get_char && port->ops->poll_put_char)) return -1; + if (port->ops->poll_init) { + struct tty_port *tport = &state->port; + + ret = 0; + mutex_lock(&tport->mutex); + /* + * We don't set ASYNCB_INITIALIZED as we only initialized the + * hw, e.g. state->xmit is still uninitialized. + */ + if (!test_bit(ASYNCB_INITIALIZED, &tport->flags)) + ret = port->ops->poll_init(port); + mutex_unlock(&tport->mutex); + if (ret) + return ret; + } + if (options) { uart_parse_options(options, &baud, &parity, &bits, &flow); return uart_set_options(port, NULL, baud, parity, bits, flow);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 7cf0b68..822c887 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h@@ -274,6 +274,7 @@ struct uart_ops { int (*verify_port)(struct uart_port *, struct serial_struct *); int (*ioctl)(struct uart_port *, unsigned int, unsigned long); #ifdef CONFIG_CONSOLE_POLL + int (*poll_init)(struct uart_port *); void (*poll_put_char)(struct uart_port *, unsigned char); int (*poll_get_char)(struct uart_port *); #endif
--
1.7.12