[PATCH 1/2] pch_uart: Fix rx error interrupt setting issue
From: Tomoya MORINAGA <hidden>
Date: 2012-07-06 08:19:38
Also in:
lkml
Subsystem:
the rest, tty layer and serial drivers · Maintainers:
Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
Rx Error interrupt(E.G. parity error) is not enabled. So, when parity error occurs, error interrupt is not occurred. As a result, the received data is not dropped. This patch adds enable/disable rx error interrupt code. Signed-off-by: Tomoya MORINAGA <redacted> --- drivers/tty/serial/pch_uart.c | 18 ++++++++++++------ 1 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 4fdec6a..4d84ad0 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c@@ -754,7 +754,8 @@ static void pch_dma_rx_complete(void *arg) tty_flip_buffer_push(tty); tty_kref_put(tty); async_tx_ack(priv->desc_rx); - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); } static void pch_dma_tx_complete(void *arg)
@@ -809,7 +810,8 @@ static int handle_rx_to(struct eg20t_port *priv) int rx_size; int ret; if (!priv->start_rx) { - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); return 0; } buf = &priv->rxbuf;
@@ -1078,11 +1080,13 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) case PCH_UART_IID_RDR: /* Received Data Ready */ if (priv->use_dma) { pch_uart_hal_disable_interrupt(priv, - PCH_UART_HAL_RX_INT); + PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); ret = dma_handle_rx(priv); if (!ret) pch_uart_hal_enable_interrupt(priv, - PCH_UART_HAL_RX_INT); + PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); } else { ret = handle_rx(priv); }
@@ -1208,7 +1212,8 @@ static void pch_uart_stop_rx(struct uart_port *port) struct eg20t_port *priv; priv = container_of(port, struct eg20t_port, port); priv->start_rx = 0; - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); } /* Enable the modem status interrupts. */
@@ -1300,7 +1305,8 @@ static int pch_uart_startup(struct uart_port *port) pch_request_dma(port); priv->start_rx = 1; - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); uart_update_timeout(port, CS8, default_baud); return 0;
--
1.7.4.4