On Sat, 4 Feb 2012, NeilBrown wrote:

On Fri, 3 Feb 2012 19:06:19 -0700 (MST) Paul Walmsley [off-list ref] wrote:

quoted

Here's a patch that helps.  It seems to work down to an 
autosuspend_delay_ms of 1 ms.  Without it, the best I can get is 8 ms.

Of course, ideally it should work fine at autosuspend_delay_ms = 0, so 
likely there's some other infelicity that we're currently missing.

Neil, care to give this a test and confirm it on your setup?

Yes, that seems to make the output corruption go away.

Cool, thanks for the test :-)

Even with small autosuspend_delay_ms down to 0 it doesn't corrupt output,
but as the first input byte is corrupted, I cannot really type with those
setting (so I ssh to gain control again).

Could you try pasting in a buffer from another window?  If I paste in the 
buffer at the bottom of this message a few times, I see some output 
corruption. 


- Paul


 
;
;
;
;
cat  /sys/devices/platform/omap/omap_uart.2/power/autosuspend_delay_ms
echo 0 > /sys/devices/platform/omap/omap_uart.2/power/autosuspend_delay_ms
cat /proc/interrupts
;