Hello Greg,

On Wed, Jan 25, 2012 at 07:52:58AM -0800, Greg KH wrote:

On Wed, Jan 25, 2012 at 09:05:04AM +0100, Uwe Kleine-König wrote:

quoted

Signed-off-by: Uwe Kleine-König <redacted>
---
changes since v3 (id:1326127447-20284-1-git-send-email-u.kleine-koenig@pengutronix.de)
 - increase number of ports to support UART additionally to USART ports
 - implement choosing route location
 - implement setting stopbit config
   (before one stop bit was configured and CSTOPB was set unconditionally which
   is wrong. Spotted by Russell King.)
 - implement break, sysrq and overflow detection
 - drop unrelated changing to make patch apply on v3.3-rc1

Hello Greg,

On Tue, Jan 24, 2012 at 02:05:22PM -0800, Greg KH wrote:

quoted

On Mon, Jan 09, 2012 at 05:44:07PM +0100, Uwe Kleine-König wrote:

quoted

Signed-off-by: Uwe Kleine-König <redacted>
---
Hello,

changes since v2:
- use {read,write}l_relaxed
- rename driver to efm32-uart as USARTs and UARTs can be handled both
  with it
- disable TX in .stop_tx (which needs some changes related to
  USARTn_IF_TXC)

Best regards
Uwe

 .../devicetree/bindings/tty/serial/efm32-uart.txt  |   14 +
 arch/arm/boot/dts/efm32gg-dk3750.dts               |    2 +-
 arch/arm/mach-efm32/devices/pdev-efm32-usart.c     |    6 +-

This file isn't in 3.3-rc1, so I can't apply this patch :(

What tree is it supposed to be against?

Sorry, I messed this up, it bases on my private development tree. These
two changes should go independant of the driver patch via an ARM tree
(if at all).

I added a few more features in the meantime, so the options are:
 - take v3 simply droping the hunks changing
   arch/arm/boot/dts/efm32gg-dk3750.dts and
   arch/arm/mach-efm32/devices/pdev-efm32-usart.c
 - take this for 3.3
 - take this for 3.4

My preference would be of course the second option, but for me the other two
would be OK if you don't like taking the update that late, too.

I was going to take this for the 3.4 merge, adding it to my tree now.
It should be ok to drop those hunks, right?

Yeah, but if you were taking v4 then you wouldn't need to drop these hunks.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html