On Tue, Jul 19, 2022 at 10:17:17AM +0530, Kanchan Joshi wrote:
On Mon, Jul 18, 2022 at 05:52:01PM -0400, Paul Moore wrote:
quoted
On Mon, Jul 18, 2022 at 1:12 PM Casey Schaufler [off-list ref] wrote:
quoted
On 7/15/2022 8:33 PM, Paul Moore wrote:
quoted
On Fri, Jul 15, 2022 at 3:52 PM Paul Moore [off-list ref] wrote:
quoted
On Fri, Jul 15, 2022 at 3:28 PM Jens Axboe [off-list ref] wrote:
quoted
On 7/15/22 1:16 PM, Luis Chamberlain wrote:
quoted
io-uring cmd support was added through ee692a21e9bf ("fs,io_uring:
add infrastructure for uring-cmd"), this extended the struct
file_operations to allow a new command which each subsystem can use
to enable command passthrough. Add an LSM specific for the command
passthrough which enables LSMs to inspect the command details.
This was discussed long ago without no clear pointer for something
conclusive, so this enables LSMs to at least reject this new file
operation.
From an io_uring perspective, this looks fine to me. It may be easier if
I take this through my tree due to the moving of the files, or the
security side can do it but it'd have to then wait for merge window (and
post io_uring branch merge) to do so. Just let me know. If done outside
of my tree, feel free to add:
I forgot to add this earlier ... let's see how the timing goes, I
don't expect the LSM/Smack/SELinux bits to be ready and tested before
the merge window opens so I'm guessing this will not be an issue in
practice, but thanks for the heads-up.
I have a patch that may or may not be appropriate. I ran the
liburing tests without (additional) failures, but it looks like
there isn't anything there testing uring_cmd. Do you have a
test tucked away somewhere I can use?
Earlier testing was done using fio. liburing tests need a formal review
in list. Tree is here -
https://github.com/ankit-sam/liburing/tree/uring-pt
It adds new "test/io_uring_passthrough.t", which can be run this way:
./test/io_uring_passthrough.t /dev/ng0n1
Requires nvme device (/dev/ng0n1). And admin-access as well, as this
is raw open. FWIW, each passthrough command (at nvme driver level) is
also guarded by admin-access.
Ankit (CCed) has the plans to post it (will keep you guys in loop) after
bit more testing with 5.20 branch.
Another candidate is ublksrv[1] which doesn't require any device and
is pretty easy to setup. However, the kernel side driver(ublk_drv) isn't
merged to linus tree yet, but has been in for-5.20/block.
And io_uring command is sent to both /dev/ublk-control and /dev/ublkcN.
[1] https://github.com/ming1/ubdsrv.git
Thanks,
Ming