[PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag

(Maintainers bcc, to avoid too many recipient troubles)

As discussed at:
	https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/

It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the
automarkup.py extension should handle it automatically, on most cases.

There are a couple of exceptions to this rule:

1. when :doc:  tag is used to point to a kernel-doc DOC: markup;
2. when it is used with a named tag, e. g. :doc:`some name <foo>`;

On this series:

Patch 1 manually adjust the references inside driver-api/pm/devices.rst,
as there it uses :file:`foo` to refer to some Documentation/ files;

Patch 2 converts a table at Documentation/dev-tools/kunit/api/index.rst
into a list, carefully avoiding the 

The remaining patches convert the other occurrences via a replace script.
They were manually edited, in order to honour 80-columns where possible.

This series based on docs-next branch. In order to avoid merge conflicts,
I rebased it internally against yesterday's linux-next, dropping a patch
and a hunk that would have caused conflicts there.

I'll re-send the remaining patch (plus another patch) with conflicting
changes, together with any other doc:`filename` reference that might
still be upstream by 5.14-rc1.

---

v2:
   - dropped media patches (as I merged via my own tree);
   - removed one patch that would conflict at linux-next (adm1177.rst);
   - removed one hunk fron kunit patch that would also conflict at
     linux-next.

Mauro Carvalho Chehab (29):
  docs: devices.rst: better reference documentation docs
  docs: dev-tools: kunit: don't use a table for docs name
  docs: admin-guide: pm: avoid using ReST :doc:`foo` markup
  docs: admin-guide: hw-vuln: avoid using ReST :doc:`foo` markup
  docs: admin-guide: sysctl: avoid using ReST :doc:`foo` markup
  docs: block: biodoc.rst: avoid using ReST :doc:`foo` markup
  docs: bpf: bpf_lsm.rst: avoid using ReST :doc:`foo` markup
  docs: core-api: avoid using ReST :doc:`foo` markup
  docs: dev-tools: testing-overview.rst: avoid using ReST :doc:`foo`
    markup
  docs: dev-tools: kunit: avoid using ReST :doc:`foo` markup
  docs: devicetree: bindings: submitting-patches.rst: avoid using ReST
    :doc:`foo` markup
  docs: doc-guide: avoid using ReST :doc:`foo` markup
  docs: driver-api: avoid using ReST :doc:`foo` markup
  docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:`foo`
    markup
  docs: driver-api: surface_aggregator: avoid using ReST :doc:`foo`
    markup
  docs: driver-api: usb: avoid using ReST :doc:`foo` markup
  docs: firmware-guide: acpi: avoid using ReST :doc:`foo` markup
  docs: i2c: avoid using ReST :doc:`foo` markup
  docs: kernel-hacking: hacking.rst: avoid using ReST :doc:`foo` markup
  docs: networking: devlink: avoid using ReST :doc:`foo` markup
  docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReST :doc:`foo`
    markup
  docs: PCI: pci.rst: avoid using ReST :doc:`foo` markup
  docs: process: submitting-patches.rst: avoid using ReST :doc:`foo`
    markup
  docs: security: landlock.rst: avoid using ReST :doc:`foo` markup
  docs: trace: coresight: coresight.rst: avoid using ReST :doc:`foo`
    markup
  docs: trace: ftrace.rst: avoid using ReST :doc:`foo` markup
  docs: userspace-api: landlock.rst: avoid using ReST :doc:`foo` markup
  docs: virt: kvm: s390-pv-boot.rst: avoid using ReST :doc:`foo` markup
  docs: x86: avoid using ReST :doc:`foo` markup

 .../PCI/endpoint/pci-endpoint-cfs.rst         |  2 +-
 Documentation/PCI/pci.rst                     |  6 +--
 .../special-register-buffer-data-sampling.rst |  3 +-
 Documentation/admin-guide/pm/intel_idle.rst   | 16 +++++---
 Documentation/admin-guide/pm/intel_pstate.rst |  9 +++--
 Documentation/admin-guide/sysctl/abi.rst      |  2 +-
 Documentation/admin-guide/sysctl/kernel.rst   | 37 ++++++++++---------
 Documentation/block/biodoc.rst                |  2 +-
 Documentation/bpf/bpf_lsm.rst                 | 13 ++++---
 .../core-api/bus-virt-phys-mapping.rst        |  2 +-
 Documentation/core-api/dma-api.rst            |  5 ++-
 Documentation/core-api/dma-isa-lpc.rst        |  2 +-
 Documentation/core-api/index.rst              |  4 +-
 Documentation/dev-tools/kunit/api/index.rst   |  8 ++--
 Documentation/dev-tools/kunit/faq.rst         |  2 +-
 Documentation/dev-tools/kunit/index.rst       | 14 +++----
 Documentation/dev-tools/kunit/start.rst       |  4 +-
 Documentation/dev-tools/kunit/tips.rst        |  5 ++-
 Documentation/dev-tools/kunit/usage.rst       |  8 ++--
 Documentation/dev-tools/testing-overview.rst  | 16 ++++----
 .../bindings/submitting-patches.rst           | 11 +++---
 Documentation/doc-guide/contributing.rst      |  8 ++--
 Documentation/driver-api/gpio/using-gpio.rst  |  4 +-
 Documentation/driver-api/ioctl.rst            |  2 +-
 Documentation/driver-api/pm/devices.rst       |  8 ++--
 .../surface_aggregator/clients/index.rst      |  3 +-
 .../surface_aggregator/internal.rst           | 15 ++++----
 .../surface_aggregator/overview.rst           |  6 ++-
 Documentation/driver-api/usb/dma.rst          |  6 +--
 .../acpi/dsd/data-node-references.rst         |  3 +-
 .../firmware-guide/acpi/dsd/graph.rst         |  2 +-
 .../firmware-guide/acpi/enumeration.rst       |  7 ++--
 Documentation/i2c/instantiating-devices.rst   |  2 +-
 Documentation/i2c/old-module-parameters.rst   |  3 +-
 Documentation/i2c/smbus-protocol.rst          |  4 +-
 Documentation/kernel-hacking/hacking.rst      |  4 +-
 .../networking/devlink/devlink-region.rst     |  2 +-
 .../networking/devlink/devlink-trap.rst       |  4 +-
 Documentation/process/submitting-patches.rst  | 32 ++++++++--------
 Documentation/security/landlock.rst           |  3 +-
 Documentation/trace/coresight/coresight.rst   |  8 ++--
 Documentation/trace/ftrace.rst                |  2 +-
 Documentation/userspace-api/landlock.rst      | 11 +++---
 Documentation/virt/kvm/s390-pv-boot.rst       |  2 +-
 Documentation/x86/boot.rst                    |  4 +-
 Documentation/x86/mtrr.rst                    |  2 +-
 46 files changed, 171 insertions(+), 147 deletions(-)

-- 
2.31.1

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/security/landlock.rst | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/security/landlock.rst b/Documentation/security/landlock.rst
index 2e84925ae971..3df68cb1d10f 100644
--- a/Documentation/security/landlock.rst
+++ b/Documentation/security/landlock.rst

@@ -25,7 +25,8 @@ Any user can enforce Landlock rulesets on their processes.  They are merged and
 evaluated according to the inherited ones in a way that ensures that only more
 constraints can be added.
 
-User space documentation can be found here: :doc:`/userspace-api/landlock`.
+User space documentation can be found here:
+Documentation/userspace-api/landlock.rst.
 
 Guiding principles for safe access controls
 ===========================================

-- 
2.31.1

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/userspace-api/landlock.rst | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/Documentation/userspace-api/landlock.rst b/Documentation/userspace-api/landlock.rst
index 62c9361a3c7f..f35552ff19ba 100644
--- a/Documentation/userspace-api/landlock.rst
+++ b/Documentation/userspace-api/landlock.rst

@@ -145,7 +145,8 @@ Bind mounts and OverlayFS
 
 Landlock enables to restrict access to file hierarchies, which means that these
 access rights can be propagated with bind mounts (cf.
-:doc:`/filesystems/sharedsubtree`) but not with :doc:`/filesystems/overlayfs`.
+Documentation/filesystems/sharedsubtree.rst) but not with
+Documentation/filesystems/overlayfs.rst.
 
 A bind mount mirrors a source file hierarchy to a destination.  The destination
 hierarchy is then composed of the exact same files, on which Landlock rules can

@@ -170,8 +171,8 @@ Inheritance
 
 Every new thread resulting from a :manpage:`clone(2)` inherits Landlock domain
 restrictions from its parent.  This is similar to the seccomp inheritance (cf.
-:doc:`/userspace-api/seccomp_filter`) or any other LSM dealing with task's
-:manpage:`credentials(7)`.  For instance, one process's thread may apply
+Documentation/userspace-api/seccomp_filter.rst) or any other LSM dealing with
+task's :manpage:`credentials(7)`.  For instance, one process's thread may apply
 Landlock rules to itself, but they will not be automatically applied to other
 sibling threads (unlike POSIX thread credential changes, cf.
 :manpage:`nptl(7)`).

@@ -278,7 +279,7 @@ Memory usage
 ------------
 
 Kernel memory allocated to create rulesets is accounted and can be restricted
-by the :doc:`/admin-guide/cgroup-v1/memory`.
+by the Documentation/admin-guide/cgroup-v1/memory.rst.
 
 Questions and answers
 =====================

@@ -303,7 +304,7 @@ issues, especially when untrusted processes can manipulate them (cf.
 Additional documentation
 ========================
 
-* :doc:`/security/landlock`
+* Documentation/security/landlock.rst
 * https://landlock.io
 
 .. Links

-- 
2.31.1

Mauro Carvalho Chehab [off-list ref] writes:

(Maintainers bcc, to avoid too many recipient troubles)

As discussed at:
	https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/

It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the
automarkup.py extension should handle it automatically, on most cases.

I've applied the set, thanks.

jon

On 16/06/2021 08:27, Mauro Carvalho Chehab wrote:

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/userspace-api/landlock.rst | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

Acked-by: Mickaël Salaün <redacted>

Like others, I think it would be nice to explain the reason of this
change in the commit message, and why it is better than the current way
to do it.