Re: [PATCH v40 11/24] x86/sgx: Add SGX misc driver interface

From
Jarkko Sakkinen <jarkko@kernel.org>
Date
2020-11-05 01:10:56
Also in
lkml
Reply to
Jarkko Sakkinen, 2020-11-04
Noticed couple of minor glitches.

On Wed, Nov 04, 2020 at 04:54:17PM +0200, Jarkko Sakkinen wrote:
quoted hunk ↗ jump to hunk
+int sgx_encl_may_map(struct sgx_encl *encl, unsigned long start,
+		     unsigned long end, unsigned long vm_flags)
+{
+	unsigned long vm_prot_bits = vm_flags & (VM_READ | VM_WRITE | VM_EXEC);
+	struct sgx_encl_page *page;
+	unsigned long count = 0;
+	int ret = 0;
+
+	XA_STATE(xas, &encl->page_array, PFN_DOWN(start));
+
+	/*
+	 * Disallow READ_IMPLIES_EXEC tasks as their VMA permissions might
+	 * conflict with the enclave page permissions.
+	 */
+	if (current->personality & READ_IMPLIES_EXEC)
+		return -EACCES;
+
+	mutex_lock(&encl->lock);
+	xas_lock(&xas);
+	xas_for_each(&xas, page, PFN_DOWN(end - 1)) {
+		if (!page)
+			break;
A redundant check, can be removed.
quoted hunk ↗ jump to hunk
+
+		if (~page->vm_max_prot_bits & vm_prot_bits) {
+			ret = -EACCES;
+			break;
+		}
+
+		/* Reschedule on every XA_CHECK_SCHED iteration. */
+		if (!(++count % XA_CHECK_SCHED)) {
+			xas_pause(&xas);
+			xas_unlock(&xas);
+			mutex_unlock(&encl->lock);
+
+			cond_resched();
+
+			mutex_lock(&encl->lock);
+			xas_lock(&xas);
+		}
+	}
+	xas_unlock(&xas);
+	mutex_unlock(&encl->lock);
+
+	return ret;
+}
+
+static int sgx_vma_mprotect(struct vm_area_struct *vma,
+			    struct vm_area_struct **pprev, unsigned long start,
+			    unsigned long end, unsigned long newflags)
+{
+	int ret;
+
+	ret = sgx_encl_may_map(vma->vm_private_data, start, end, newflags);
+	if (ret)
+		return ret;
+
+	return mprotect_fixup(vma, pprev, start, end, newflags);
+}
+
+const struct vm_operations_struct sgx_vm_ops = {
+	.fault = sgx_vma_fault,
+	.mprotect = sgx_vma_mprotect,
+};
+
+/**
+ * sgx_encl_find - find an enclave
+ * @mm:		mm struct of the current process
+ * @addr:	address in the ELRANGE
+ * @vma:	the resulting VMA
+ *
+ * Find an enclave identified by the given address. Give back a VMA that is
+ * part of the enclave and located in that address. The VMA is given back if it
+ * is a proper enclave VMA even if an &sgx_encl instance does not exist yet
+ * (enclave creation has not been performed).
+ *
+ * Return:
+ *   0 on success,
+ *   -EINVAL if an enclave was not found,
+ *   -ENOENT if the enclave has not been created yet
+ */
+int sgx_encl_find(struct mm_struct *mm, unsigned long addr,
+		  struct vm_area_struct **vma)
+{
+	struct vm_area_struct *result;
+	struct sgx_encl *encl;
+
+	result = find_vma(mm, addr);
+	if (!result || result->vm_ops != &sgx_vm_ops || addr < result->vm_start)
+		return -EINVAL;
+
+	encl = result->vm_private_data;
+	*vma = result;
+
+	return encl ? 0 : -ENOENT;
+}
Since v20 there has been 1:1 assocition between enclaves and files.
In other words, this can never return -ENOENT.

With this reduction the function turns into:

int sgx_encl_find(struct mm_struct *mm, unsigned long addr,
		  struct vm_area_struct **vma)
{
	struct vm_area_struct *result;

	result = find_vma(mm, addr);
	if (!result || result->vm_ops != &sgx_vm_ops || addr < result->vm_start)
		return -EINVAL;

	*vma = result;

	return 0;
}

There are only two call sites:

1. sgx_encl_test_and_clear_young()
2. sgx_reclaimer_block()

I.e. would not be a big trouble to tune the signature a bit:

struct vm_area_struct *sgx_encl_find_vma(struct mm_struct *mm, unsigned long addr)
{
	struct vm_area_struct *result;

	result = find_vma(mm, addr);
	if (!result || result->vm_ops != &sgx_vm_ops || addr < result->vm_start)
		return NULL;

	return result;
}

There is a function called sgx_encl_find_mm(), which is *unrelated* to
this function and has only one call sites. Its flow is very linear. In
order to avoid confusion, I'd open code that into sgx_encl_mm_add().

/Jarkko
Thread (9 messages) 9 messages, 3 authors, last reply 2020-11-06
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help