Lock down TIOCSSERIAL as that can be used to change the ioport and irq
settings on a serial port.  This only appears to be an issue for the serial
drivers that use the core serial code.  All other drivers seem to either
ignore attempts to change port/irq or give an error.

Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jiri Slaby <redacted>
---

 drivers/tty/serial/serial_core.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 3a14cccbd7ff..41f0922ad842 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c

@@ -842,6 +842,12 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
 	new_flags = (__force upf_t)new_info->flags;
 	old_custom_divisor = uport->custom_divisor;
 
+	if ((change_port || change_irq) &&
+	    kernel_is_locked_down("Using TIOCSSERIAL to change device addresses, irqs and dma channels")) {
+		retval = -EPERM;
+		goto exit;
+	}
+
 	if (!capable(CAP_SYS_ADMIN)) {
 		retval = -EPERM;
 		if (change_irq || change_port ||

--

To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html