[PATCH V4 15/31] smartpqi: add support for wwid
From: Don Brace <don.brace@microchip.com>
Date: 2021-03-10 20:02:55
Subsystem:
microsemi smart array smartpqi driver (smartpqi), scsi subsystem, the rest · Maintainers:
Don Brace, "James E.J. Bottomley", "Martin K. Petersen", Linus Torvalds
From: Kevin Barnett <redacted> Wwid has been added to Report Physical LUNs in newer controller firmware. The presence of this field is detected by a feature bit. Add in detection of this new feature and store the wwid when set. Reviewed-by: Scott Benesh <redacted> Reviewed-by: Mike McGowen <redacted> Reviewed-by: Scott Teel <redacted> Signed-off-by: Kevin Barnett <redacted> Signed-off-by: Don Brace <don.brace@microchip.com> --- drivers/scsi/smartpqi/smartpqi.h | 5 ++++- drivers/scsi/smartpqi/smartpqi_init.c | 24 +++++++++++++++++++++++- 2 files changed, 27 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
index 8e5e2543c7cf..a579d772dce0 100644
--- a/drivers/scsi/smartpqi/smartpqi.h
+++ b/drivers/scsi/smartpqi/smartpqi.h@@ -853,7 +853,8 @@ struct pqi_config_table_firmware_features { #define PQI_FIRMWARE_FEATURE_RAID_IU_TIMEOUT 13 #define PQI_FIRMWARE_FEATURE_TMF_IU_TIMEOUT 14 #define PQI_FIRMWARE_FEATURE_RAID_BYPASS_ON_ENCRYPTED_NVME 15 -#define PQI_FIRMWARE_FEATURE_MAXIMUM 15 +#define PQI_FIRMWARE_FEATURE_UNIQUE_WWID_IN_REPORT_PHYS_LUN 16 +#define PQI_FIRMWARE_FEATURE_MAXIMUM 16 struct pqi_config_table_debug { struct pqi_config_table_section_header header;
@@ -1110,6 +1111,7 @@ struct pqi_scsi_dev { struct pqi_stream_data stream_data[NUM_STREAMS_PER_LUN]; atomic_t scsi_cmds_outstanding; atomic_t raid_bypass_cnt; + u8 page_83_identifier[16]; }; /* VPD inquiry pages */
@@ -1303,6 +1305,7 @@ struct pqi_ctrl_info { u8 soft_reset_handshake_supported : 1; u8 raid_iu_timeout_supported : 1; u8 tmf_iu_timeout_supported : 1; + u8 unique_wwid_in_report_phys_lun_supported : 1; u8 enable_r1_writes : 1; u8 enable_r5_writes : 1; u8 enable_r6_writes : 1;
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 176c0d1ac913..1000f56504e8 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c@@ -1441,6 +1441,9 @@ static int pqi_get_physical_device_info(struct pqi_ctrl_info *ctrl_info, sizeof(device->phys_connector)); device->bay = id_phys->phys_bay_in_box; + memcpy(&device->page_83_identifier, &id_phys->page_83_identifier, + sizeof(device->page_83_identifier)); + return 0; }
@@ -2045,6 +2048,16 @@ static inline bool pqi_expose_device(struct pqi_scsi_dev *device) return !device->is_physical_device || !pqi_skip_device(device->scsi3addr); } +static inline void pqi_set_physical_device_wwid(struct pqi_ctrl_info *ctrl_info, + struct pqi_scsi_dev *device, struct report_phys_lun_extended_entry *phys_lun_ext_entry) +{ + if (ctrl_info->unique_wwid_in_report_phys_lun_supported || + pqi_is_device_with_sas_address(device)) + device->wwid = phys_lun_ext_entry->wwid; + else + device->wwid = cpu_to_be64(get_unaligned_be64(&device->page_83_identifier)); +} + static int pqi_update_scsi_devices(struct pqi_ctrl_info *ctrl_info) { int i;
@@ -2210,7 +2223,7 @@ static int pqi_update_scsi_devices(struct pqi_ctrl_info *ctrl_info) pqi_assign_bus_target_lun(device); if (device->is_physical_device) { - device->wwid = phys_lun_ext_entry->wwid; + pqi_set_physical_device_wwid(ctrl_info, device, phys_lun_ext_entry); if ((phys_lun_ext_entry->device_flags & CISS_REPORT_PHYS_DEV_FLAG_AIO_ENABLED) && phys_lun_ext_entry->aio_handle) {
@@ -7407,6 +7420,10 @@ static void pqi_ctrl_update_feature_flags(struct pqi_ctrl_info *ctrl_info, case PQI_FIRMWARE_FEATURE_TMF_IU_TIMEOUT: ctrl_info->tmf_iu_timeout_supported = firmware_feature->enabled; break; + case PQI_FIRMWARE_FEATURE_UNIQUE_WWID_IN_REPORT_PHYS_LUN: + ctrl_info->unique_wwid_in_report_phys_lun_supported = + firmware_feature->enabled; + break; } pqi_firmware_feature_status(ctrl_info, firmware_feature);
@@ -7497,6 +7514,11 @@ static struct pqi_firmware_feature pqi_firmware_features[] = { .feature_bit = PQI_FIRMWARE_FEATURE_RAID_BYPASS_ON_ENCRYPTED_NVME, .feature_status = pqi_firmware_feature_status, }, + { + .feature_name = "Unique WWID in Report Physical LUN", + .feature_bit = PQI_FIRMWARE_FEATURE_UNIQUE_WWID_IN_REPORT_PHYS_LUN, + .feature_status = pqi_ctrl_update_feature_flags, + }, }; static void pqi_process_firmware_features(