Re: [PATCH v8 1/2] scsi: ufs: Enable power management for wlun

On 1/03/21 8:10 pm, Asutosh Das wrote:

On Mon, Mar 01 2021 at 05:23 -0800, Adrian Hunter wrote:

quoted

On 26/02/21 1:37 am, Asutosh Das wrote:

quoted

@@ -8901,43 +9125,14 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)

             goto vendor_suspend;
     }

The ufshcd_reset_and_restore() in ufshcd_resume() will also change the power
mode of the UFS device to active.  Until the UFS device is also resumed and
then suspended, it will not return to a low power mode.

Umm, sorry, I didn't understand this comment.
Say, the UFS device was reset in ufshcd_reset_and_restore() it'd be a hardware
reset and the UFS device would move to Powered On mode and then to Active power
mode, when it is ready to begin initialization. And from this state it should
move to all other legal states.
Before entering system suspend ufshcd_system_suspend(), the ufs device is
runtime resumed in ufshcd_suspend_prepare().

Please can you explain a bit more on this issue that you see?

Say you runtime resume the host controller, and
ufshcd_reset_and_restore() makes the UFS device active,
but the UFS device is still runtime suspended.


Example:

Add a debugfs file to show the current power mode:

diff --git a/drivers/scsi/ufs/ufs-debugfs.c b/drivers/scsi/ufs/ufs-debugfs.c
index dee98dc72d29..700b88df0866 100644
--- a/drivers/scsi/ufs/ufs-debugfs.c
+++ b/drivers/scsi/ufs/ufs-debugfs.c

@@ -48,6 +48,7 @@ void ufs_debugfs_hba_init(struct ufs_hba *hba)
 {
        hba->debugfs_root = debugfs_create_dir(dev_name(hba->dev), ufs_debugfs_root);
        debugfs_create_file("stats", 0400, hba->debugfs_root, hba, &ufs_debugfs_stats_fops);
+       debugfs_create_u32("curr_dev_pwr_mode", 0400, hba->debugfs_root, (u32 *)&hba->curr_dev_pwr_mode);
 }

 void ufs_debugfs_hba_exit(struct ufs_hba *hba)

# grep -H . /sys/bus/pci/drivers/ufshcd/0000\:00\:12.5/rpm*
/sys/bus/pci/drivers/ufshcd/0000:00:12.5/rpm_lvl:6
/sys/bus/pci/drivers/ufshcd/0000:00:12.5/rpm_target_dev_state:DEEPSLEEP
/sys/bus/pci/drivers/ufshcd/0000:00:12.5/rpm_target_link_state:OFF
# cat /sys/kernel/debug/ufshcd/0000\:00\:12.5/curr_dev_pwr_mode
4
# echo on > /sys/devices/pci0000:00/0000:00:12.5/power/control
# cat /sys/kernel/debug/ufshcd/0000\:00\:12.5/curr_dev_pwr_mode
1
# grep -H . /sys/bus/pci/drivers/ufshcd/0000\:00\:12.5/host*/target*/*/power/runtime_status
/sys/bus/pci/drivers/ufshcd/0000:00:12.5/host1/target1:0:0/1:0:0:0/power/runtime_status:suspended
/sys/bus/pci/drivers/ufshcd/0000:00:12.5/host1/target1:0:0/1:0:0:49456/power/runtime_status:suspended
/sys/bus/pci/drivers/ufshcd/0000:00:12.5/host1/target1:0:0/1:0:0:49476/power/runtime_status:suspended
/sys/bus/pci/drivers/ufshcd/0000:00:12.5/host1/target1:0:0/1:0:0:49488/power/runtime_status:suspended

So UFS devices is runtime suspended and should in DeepSleep, but it is active.