Thread (7 messages) 7 messages, 2 authors, 2011-01-20

[Bug 26992] iscsi session re-establishment by client does not work (auth method rejected by target)

From: <hidden>
Date: 2011-01-18 00:26:48

https://bugzilla.kernel.org/show_bug.cgi?id=26992




--- Comment #2 from Anonymous Emailer <anonymous@kernel-bugs.osdl.org>  2011-01-18 00:26:43 ---
Reply-To: michaelc@cs.wisc.edu

On 01/17/2011 06:12 PM, bugzilla-daemon@bugzilla.kernel.org wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=26992

            Summary: iscsi session re-establishment by client does not work
                     (auth method rejected by target)
            Product: IO/Storage
            Version: 2.5
     Kernel Version:>=2.6.33
           Platform: All
         OS/Version: Linux
               Tree: Mainline
             Status: NEW
           Severity: blocking
           Priority: P1
          Component: SCSI
         AssignedTo: linux-scsi@vger.kernel.org
         ReportedBy: bugzilla-kernel-org-sux2k0@mstier.de
                 CC: bugzilla-kernel-org-sux2k0@mstier.de
         Regression: No


Latest client kernel version known to work: 2.6.32.27 (vanilla)
First client kernel version known NOT to work: 2.6.33 (vanilla)

I'm doing sanboot via iSCSI/TCP using gPXE 1.0.1 from etherboot.org. The gPXE
chain boot loader registers the iSCSI target lun as boot disk and when the
Ubuntu OS starts iscsid, session re-establishment fails when using kernel
2.6.33 or higher on the client (session startup configured as manual). Works
perfectly with 2.6.32.27 on the client.
Are these kernel.org/open-iscsi.org open-iscsi tools ir distro build ones?

I think this is due to a sysfs issue. If I am right it should be fixed 
in 872 
(http://kernel.org/pub/linux/kernel/people/mnc/open-iscsi/releases/open-iscsi-2.0-872.tar.gz) 
or I think you can change the SYSFS DEPRECIATED and SYSFS V2 DEPRECIATED 
settings. I cannot remember if you need to turn it on or off (I think 
you need to turn it on with older tools). Send your .config.

Also could you send the log messages for when it fails? And does normal 
login work? If you just boot from a local drive and run iscsiadm to 
login does it fail? What is the error message and what is the 
/var/log/message output?

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help