[rtc-linux] Re: [PATCH v5] rtc: omap: Support ext_wakeup configuration

On Thu, Sep 08, 2016 at 12:52:03PM +0200, Marcin Niestroj wrote:

Support configuration of ext_wakeup sources. This patch makes it
possible to enable ext_wakeup and set it's polarity, depending on board
configuration. AM335x's dedicated PMIC (tps65217) uses ext_wakeup to
notify about power-button presses. Handling power-button presses enables
to recover from RTC-only power states correctly.

Signed-off-by: Marcin Niestroj <redacted>
---
Hi,

This patch adds support for ext_wakeup using generic pinconf device-tree
bindings, with one added custom property.

Changes v4 -> v5 (suggested by Rob):
 * Don't use GPIO defines in ti,input-polarity, use optional ti,active-high
   boolean instead.
 * Use '-' instead of '_' in node name.

Changes v1 -> v4:
 * This is a total reimplementation, so it is not based on any of the previous
   patch versions. This approach has been suggested by Tony and Grygorii
   in [1].

Patch was developed on 4.7, rebased on 4.8-rc5, tested using chiliBoard.

[1] http://www.spinics.net/lists/devicetree/msg131516.html

 Documentation/devicetree/bindings/rtc/rtc-omap.txt |  21 +++

For the binding:

Acked-by: Rob Herring <robh@kernel.org>

 drivers/rtc/Kconfig                                |   1 +
 drivers/rtc/rtc-omap.c                             | 168 ++++++++++++++++++++-
 3 files changed, 182 insertions(+), 8 deletions(-)

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.