[rtc-linux] [PATCH v4 0/4] Add support for the Qualcomm PM8018 PMIC

In order to support the Qualcomm MDM9615 in the Sierra Wireless WP8548
Modules, add the PM8018 PMIC support into MFD, Regulator, RTC and input.

This patchset is part of a global SoC + Module + Board support for the
Sierra Wireless mangOH Board support with the WP8548 module.

Changes since v3 at http://lkml.kernel.org/r/1468936331-2981-1-git-send-email-narmstrong@baylibre.com :
 - Use pm8921_regs for rtc, drop mp8018 identical structs
 - Use pm8960 rpm_reg_parts for regulator, drop pm8018 identical structs

Changes since v2 at http://lkml.kernel.org/r/1466759887-25394-1-git-send-email-narmstrong@baylibre.com :
 - Dropped pwrkey changes

Changes since v1 at http://lkml.kernel.org/r/1466158929-19524-1-git-send-email-narmstrong@baylibre.com :
 - Rebase mfd/qcom_rpm.c on top of Linus "fix offset error for msm8660" and "parametrize also ack selector size" patches
 - Rename QCOM_RPM_NCP in to QCOM_RPM_PM8018_NCP
 - Rebased qcom-rpm.h PM8018 defines numbers without a gap
 - Dropped regulator corner

Neil Armstrong (4):
  mfd: pm8921: Add support for pm8018
  rtc: rtc-pm8xxx: Add support for pm8018 rtc
  mfd: qcom-rpm: Add support for pm8018 RPM Regulator
  regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator

 .../devicetree/bindings/mfd/qcom-pm8xxx.txt        |  1 +
 Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 15 +++++
 drivers/mfd/pm8921-core.c                          |  1 +
 drivers/mfd/qcom_rpm.c                             | 51 +++++++++++++++++
 drivers/regulator/qcom_rpm-regulator.c             | 66 ++++++++++++++++++++++
 drivers/rtc/rtc-pm8xxx.c                           |  1 +
 include/dt-bindings/mfd/qcom-rpm.h                 | 22 ++++++++
 7 files changed, 157 insertions(+)

-- 
1.9.1

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.