[rtc-linux] [PATCH v3 2/4] meson-rtc: add device-tree binding
From: Ben Dooks <hidden>
Date: 2016-07-05 19:48:42
Also in:
linux-amlogic, linux-devicetree
Subsystem:
open firmware and flattened device tree bindings, real time clock (rtc) subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Alexandre Belloni, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2016-07-13 · Re: [PATCH v3 2/4] meson-rtc: add device-tree binding · Mark Rutland <hidden>
- 2016-07-13 · Re: [PATCH v3 2/4] meson-rtc: add device-tree binding · Ben Dooks <hidden>
- 2016-07-13 · Re: [PATCH v3 2/4] meson-rtc: add device-tree binding · Frank Rowand <hidden>
Add documentation for the AMLogic Meson RTC. Signed-off-by: Ben Dooks <redacted> Acked-by: Rob Herring <robh@kernel.org> --- .../devicetree/bindings/rtc/rtc-amlogic.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/rtc-amlogic.txt
diff --git a/Documentation/devicetree/bindings/rtc/rtc-amlogic.txt b/Documentation/devicetree/bindings/rtc/rtc-amlogic.txt
new file mode 100644
index 0000000..efc7672
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-amlogic.txt@@ -0,0 +1,21 @@ +* AMlogic Meson RTC + +Required properties: +- compatible: should be one of the following describing the hardware: + * "amlogic,meson6-rtc" + * "amlogic,meson8-rtc" + * "amlogic,meson8b-rtc" + +- reg: physical register space for the controller's memory mapped registers. + +Optional properties: +- resets: reset controller reference to allow reset of the controller +- interrupts: single interrupt reference if interrupt support needed + +Example: + + rtc: rtc@c8100740 { + compatible = "amlogic,meson6-rtc"; + reg = <0xc8100740 0x14>; + status = "disabled"; + };
--
2.8.1
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.