[rtc-linux] [PATCH 1/6] rtc: rv8803: Kconfig: Indicate rx8900 support

This driver supports the Epson RX8900, but this was not indicated in
Kconfig.

Signed-off-by: Beno=C3=AEt Th=C3=A9baudeau <redacted>
---
 drivers/rtc/Kconfig | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 8526f1c..e215f50 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig

@@ -578,10 +578,10 @@ config RTC_DRV_EM3027
 	  will be called rtc-em3027.

=20
 config RTC_DRV_RV8803
-	tristate "Micro Crystal RV8803"
+	tristate "Micro Crystal RV8803, Epson RX8900"
 	help
-	  If you say yes here you get support for the Micro Crystal
-	  RV8803 RTC chips.
+	  If you say yes here you get support for the Micro Crystal RV8803 and
+	  Epson RX8900 RTC chips.
=20
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-rv8803.
--=20
2.5.0

--=20
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---=20
You received this message because you are subscribed to the Google Groups "=
rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.