Thread (10 messages) 10 messages, 3 authors, 2016-07-05

[rtc-linux] Re: [RFC PATCH 2/2] rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()

From: pankaj.dubey <hidden>
Date: 2016-07-05 09:41:30
Also in: lkml

Hi Alim,

On Tuesday 05 July 2016 02:26 PM, Krzysztof Kozlowski wrote:
On 07/05/2016 10:52 AM, Alim Akhtar wrote:
quoted

On 07/05/2016 01:46 PM, Krzysztof Kozlowski wrote:
quoted
On 07/04/2016 01:03 PM, Alim Akhtar wrote:
quoted
As per code flow it is possible that s3c_rtc_setfreq() might get called
with rtc clock disabled and in set_freq we perform h/w registers
read/write,
which might results in a kernel crash while probing rtc driver.
Below is one such case:
s3c_rtc_probe()
     clk_prepare_enable(info->rtc_clk) // rtc clock enabled
       s3c_rtc_gettime() // will enable clk if not done, and disable
it upon exit
         s3c_rtc_setfreq() //then this will be called with clk disabled
The indentation suggests levels of calls (chain) not sequence. This
should be:
s3c_rtc_probe()
   clk_prepare_enable(info->rtc_clk) // rtc clock enabled
   s3c_rtc_gettime() // will enable clk if not done, and disable it
upon exit
   s3c_rtc_setfreq() //then this will be called with clk disabled
quoted
This patch take cares of such issue by adding
s3c_rtc_{enable/disable}_clk in
s3c_rtc_setfreq().
What I don't get is that you wrote "it is *possible* that
s3c_rtc_setfreq() *might* get called". From my understanding this will
happen always because src_rtc_gettime() always disables the clocks.

Why it does not happen always?
Yes, you are right, it is always disabled when reaches s3c_rtc_setfreq().
And I observed a kernel crash while testing on exynos7 platform in
s3c_rtc_setfreq() because clock was always disabled at this point. And
this patches fixes this issue.
Ok, thanks! Could you adjust the commit message mentioning that it
always causes crash on Exynos 7 platform and adding:

Fixes: 24e1455493da ("drivers/rtc/rtc-s3c.c: delete duplicate clock
control")
Cc: <redacted>

Reviewed-by: Krzysztof Kozlowski <redacted>
After addressing Krzysztof's review comments, Please feel free to add

Reviewed-by: Pankaj Dubey <redacted>

For testing on Exynos7420
Tested-by: Pankaj Dubey <redacted>

Thanks,
Pankaj Dubey
Best regards,
Krzysztof
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help